ipv6 mld query-interval

Configures the frequency at which multicast listening discovery (MLD) query messages are sent.
Syntax
ipv6 mld query-interval num
no ipv6 mld query-interval num
Command Default

125 seconds

Parameters
num
Number in seconds, from 2 through 3600. The default is 125.
Modes

Global configuration mode

VRF configuration mode

Usage Guidelines

The no form of this command resets the query interval to the default of 125 seconds.

You must specify a query-interval value that is greater than the interval configured by the ipv6 mld max-response-time command.

Examples

This example sets the MLD query interval to 50 seconds. 

Device(config)# ipv6 mld query-interval 50

This example sets the MLD query interval for a VRF to 50 seconds. 

Device(config)# ipv6 router pim vrf blue
Device(config-ipv6-pim-router-vrf-blue)# ipv6 mld query-interval 50
Parent topic: Commands I