ip dscp-remark

Enables remarking of the differentiated services code point (DSCP) field for all IPv4 packets.
Syntax
ip dscp-remark dscp-value
no ip dscp-remark dscp-value
Command Default

DSCP remarking is disabled.

Parameters
dscp-value
Specifies the DSCP value ranges you are remarking.
Modes

Interface configuration mode

Usage Guidelines

The no form of this command disables DSCP remarking.

In interface configuration mode, the command enables DSCP remarking for the given port. The configuration can be done on a physical port, LAG, and VE port.

Examples

The following example enables DSCP remarking on all IPv4 packets received on a specific port when the DSCP bit value is 50: 

Device(config)# interface ethernet1/1/1
Device(config-if-e1000-1/1/1)# ip dscp-remark 50
History
Release version Command history
08.0.95 This command was modified to remove global configuration.
Parent topic: Commands I