ip route next-hop-enable-default
Device does not use the default route to resolve static route.
Global configuration mode
This command can be independently applied on a per-VRF basis.
This command works independently with the ip route next-hop-recursion and ip route
next-hop commands. If the default route is a protocol route, that protocol needs to
be enabled to resolve static routes using the ip route next-hop command in order for static routes to resolve by this default route. If the default
route itself is a static route, you must configure the
ip route next-hop-recursion command to resolve other static routes by this default route.
The
no form of the command disables the device to use the default route to resolve a static
route.