`ipv6 mld version`

Configures the multicast listening discovery (MLD) version for snooping on an interface.

Syntax

ipv6 mld version { 1 | 2 }

no ipv6 mld version { 1 | 2 }

Command Default

MLD Version 1 is configured.

Parameters

Modes

Global configuration mode

Interface configuration mode

IPv6 PIM router configuration mode

Usage Guidelines

The default MLD version when PIM Sparse Mode (PIM-SM) is enabled on an interface is MLDv1. You must configure the version 2 to enable MLDv2.

The no form of this command restores the default, that is, 1.

Examples

The following example configures MLD version 2 globally.

device(config)# ipv6 mld version 2

The following example configures MLD version 2 for a specified VRF.

device(config)# ipv6 router pim vrf blue
device(config-ipv6-pim-router-vrf-blue)# ipv6 mld version 2

The following example configures MLD version 2 on an interface.

device(config)# interface ve 10
device(config-vif-10)# ipv6 mld version 2

The following example enables MLDv2.

device(config)# interface ethernet 1/1/1
device(config-if-e10000-1/1/1)# ipv6 mld version 2

ipv6 mld version