`ipv6 mld max-group-address`

Configures the maximum number of Multicast Listener Discovery (MLD) group addresses.

Syntax

ipv6 mld
                  					max-group-address

num

no ipv6 mld
                  					max-group-address

num

Command Default

Enabled by default.

Parameters

num: Specifies the maximum number of MLD group addresses available, either for the default VRF or for the specified VRF.

Modes

Global configuration mode

Interface subtype configuration mode

VRF configuration mode

Usage Guidelines

Any MLD group memberships exceeding the group limit are not processed.

The no form of the command restores the default value.

Examples

The following example configures a maximum of 1000 MLD group addresses for the default VRF.

device# configure terminal
device(config)# ipv6 mld max-group-address 1000

The following example configures a maximum of 1000 MLD group addresses for the VRF named blue.

device# configure terminal
device(config)# ipv6 router pim vrf blue
device(config-ipv6-pim-router-vrf-blue)# ipv6 mld max-group-address 1000

The following example configures a maximum of 1000 MLD group addresses for a VE interface.

device# configure terminal
device(config)# interface ve 10
device(config-vif-10)# ipv6 mld max-group-address 1000

History

Release version	Command history
09.0.10	Support for this command was added at Interface configuration mode.

ipv6 mld max-group-address