ip dhcp-client ve
The DHCP client is enabled on the default VE port. A default VE port is created during startup, and added to the running configuration.
Global configuration mode
he DHCP client can only be configured for one specific VE port, either default or non-default, at a time. A default VE port is created during startup, and added to the running configuration. This command is applicable to a VE port. Both tagged and untagged ports can be part of this Vlan.
Use the no ip dhcp-client ve
default command to enable dhcp client on a non default VE. If there is
any dynamic IP address assigned to the default VE, it is released.
The no form of the
command disables the DHCP client for a specific VE interface and restores the
default.
The following example enables the DHCP client for a specific VE port, either default or non-default.
device# configure terminal device(config)# ip dhcp-client ve 22