`ipv6 ospf hello-jitter`

Sets the allowed jitter between HELLO packets.

Syntax

ipv6 ospf hello-jitter interval

no ipv6 ospf hello-jitter

Command Default

Parameters

jitter: Allowed interval between hello packets.Valid values range from 1 through 50 percent (%).

Modes

Interface subtype configuration mode

Usage Guidelines

The hello interval can vary from the configured hello-interval to a maximum of percentage value of configured jitter.

Examples

The following example sets the hello jitter to 20 on a specific OSPFv3 Virtual Ethernet (VE) interface.

device# configure terminal
device(config)# interface interface ve 1
device(config-vif-1)# ipv6 ospf hello-jitter 20

History

ipv6 ospf hello-jitter