ip tcp burst-max

Rate limits TCP SYN packets.

Syntax

ip tcp burst-max value

no ip tcp burst-max value

Parameters

value: The maximum allowable burst rate (Kbps) for TCP SYN packets. Valid values are 125 through 100000.

Modes

Global configuration mode

Interface configuration mode

Usage Guidelines

This command is supported for ICX 8100 and ICX 8200 devices only.

The no form of the command disables rate limiting.

Examples

The following example sets the maximum allowable burst rate for TCP SYN packets on the ICX device.

device# configure terminal
device(config)# ip tcp burst-max 100000

The following example sets the maximum allowable burst rate for TCP SYN packets on an Ethernet interface.

device# configure terminal
device(config)# interface ethernet 1/2/3
device(config-config-if-e1000-1/2/3)# ip tcp burst-max 300

History

Release version	Command history
10.0.00	This command was introduced.