inline power poe-ha

Enables perpetual PoE and fast boot PoE on a per-port basis.
inline power poe-ha
Modes

Interface configuration mode

Modes

By default, perpetual PoE and fast boot PoE are disabled in FastIron 08.0.95.

Usage Guidelines

Perpetual PoE and fast boot PoE are two new enhancements that can be configured on ICX 7550 switches to allow brief or no power downtime.

When configured, the PDs will not lose power while reloading and will have a brief power-down time when power-cycled.

Configure the inline power poe-ha command before connecting the PD. If the ports are configured before the PDs are connected, power is supplied to the PDs even while the unit is reloading.

Perpetual PoE provides uninterrupted power to the connected PDs even when the PSE switch is rebooting or reloading.

Fast boot PoE provides power to the powered devices as soon as the PSE switch is turned on without waiting for the system to boot up.

In the PoE restart process, perpetual PoE will be always on irrespective of the configuration. In a system reload case, if the configuration is not saved to the startup configuration, perpetual PoE comes on only with the next reload or power cycle.

Examples

The following example configures perpetual PoE and fast boot PoE on a per-port basis.

device# configure terminal
device(config)# interface ethernet 1/1/1
device(config-if-e1000-1/1/1)# inline power poe-ha
History
Release version Command history
08.0.95 This command was introduced.
Parent topic: Commands I