`ip mroute` next-hop-enable-default

Enables the option to use the default multicast route (mroute) to resolve a static IPv4 mroute next hop.

Syntax

ip mroute [ vrf vrf-name ] next-hop-enable-default

no ip mroute [ vrf vrf-name ] next-hop-enable-default

Command Default

Static mroutes are not resolved using the default mroute.

Parameters

vrf vrf-name: Configures a static mroute for this virtual routing and forwarding (VRF) route.

Modes

VRF configuration mode

Usage Guidelines

The no form of this command disables the default IPv4 mroute option for next hops.

Examples

The following example enables the use of the default mroute to resolve a static IPv4 mroute next hop:

Device(config-vrf)# ip mroute next-hop-enable-default

History

Release version	Command history
08.0.10a	This command was introduced.

ip mroute next-hop-enable-default