ipv6 mld llqi

Configures the multicast listener discovery (MLD) last listener query interval.
Syntax
ipv6 mld llqi seconds
no ipv6 mld llqi seconds
Command Default

The MLD last listener query interval is 1 second.

Parameters
seconds
specifies the number in seconds, of MLD group addresses available for all VRFs. The range is 1 through 25; the default is 1.
Modes

Global configuration mode

VRF configuration mode

Usage Guidelines

The no form of this command restores the default MLD last listener query interval.

Any MLD group memberships exceeding the group limit are not processed.

The last listener query interval is the maximum response delay inserted into multicast address-specific queries sent in response to Done messages, and is also the amount of time between multicast address-specific query messages. When a device receives an MLD Version 1 leave message or an MLD Version 2 state-change report, it sends out a query and expects a response within the time specified by the last listener query interval. Configuring a lower value for the last listener query interval allows members to leave groups faster.

Examples

This example configures a last listener query interval of 5 seconds. 

Device(config)# ipv6 mld llqi 5

This example configures a last listener query interval of 5 seconds for a VRF. 

Device(config)# ipv6 router pim vrf blue
Device(config-ipv6-pim-router-vrf-blue)# ipv6 mld llqi 5
Parent topic: Commands I