ip bootp-gateway

Changes the IP address used for stamping BootP or DHCP requests received on the interface.
Syntax
ip bootp-gateway ip-address
Parameters
ip-address
Specifies the IP address used to stamp requests received on the interface.
Modes

Interface configuration mode

Usage Guidelines

The BootP or DHCP stamp address is an interface parameter. Use this command to change the parameter on the interface that is connected to the BootP/DHCP client.

In the following example, the command changes the CLI to the configuration level for port 1/1/1, then changes the BootP or DHCP stamp address for requests received on port 1/1/1 to 10.157.22.26. The Layer 3 switch will place this IP address in the Gateway Address field of BootP or DHCP requests that the Layer 3 switch receives on port 1/1/1 and forwards to the BootP or DHCP server.

Examples

The following command changes the IP address used for stamping BootP or DHCP requests received on interface 1/1/1. 

device(config)# interface ethernet 1/1/1
device(config-if-1/1/1)# ip bootp-gateway 10.157.22.26
Parent topic: Commands I