Viewing Cluster Configuration

After you have configured cluster redundancy, you can view details of the active and standby clusters.
Note: Cluster redundancy is supported only on vSZ-H platforms.

Complete the following steps to view the cluster configuration.

  1. Go to Network > Data and Control Plane > Cluster.
    The Cluster page is displayed.
  2. Select the cluster, scroll down, and click the Configuration tab. You can view the cluster details listed in the following table.

    Cluster Details

    Field Description Active Cluster Standby Cluster
    Cluster Configuration

    IP Support

    Displays the IP support version. Yes Yes
    Cluster Redundancy
    Status Displays the cluster redundancy status. Yes Yes
    Cluster Redundant Role States whether the cluster is an active or a standby cluster. Yes Yes
    Mode States whether the cluster is in monitor mode or backup mode.
    6.1 update
    • Monitor mode: Standby cluster serves the active cluster only when the active cluster is out-of-service.
    • Backup mode: Standby cluster is always ready to accept external devices from the active cluster.
    Click Alter monitoring status to turn on or turn off the monitoring status of the active cluster. To remove the active cluster, select it from the list and click Delete.
    No Yes
    Active Cluster Displays the cluster name and control IP addresses of the cluster. Yes Yes
    Standby Cluster Displays the cluster name, management IP addresses, and control IP addresses of the cluster. Yes No
    Serve Active Cluster Timing
    Indicates when the standard cluster turns to backup mode and manages external devices (APs, DPs, and ICX switches).
    • Only when active cluster is out-of-service (default setting)
    • Always on service
    No Yes
    Schedule Configuration Sync
    • Status: Displays sync status.
    • System Time Zone: Displays the system time zone set.
    • Time: Displays the sync time followed every day.
    • Last Trigger Time: Displays the date and time the clusters synced last. Applies to both scheduled sync or manually sync.
    • Next Trigger Time: Displays the date and time of the next scheduled sync.
    • Sync Now: Triggers manual configuration sync operation.
    Yes No
    State Displays the system configuration sync state. Yes No
    Progress Status Displays the progressive status of the system configuration sync. Yes No