Applying Patch or Diagnostic Scripts

Each of the patch or diagnostic scripts is unique in its capabilities and depending on the issue that is to be addressed or the kind of diagnosing that will be performed, the patch can be applied directly using the Web UI in the controller or it should be executed to individual nodes using the CLI of the controller. Consult with RUCKUS Support for confirmation on the appropriate way to apply or execute the required script.

Complete the following steps to apply a patch/diagnostic script using the Web UI:

  1. From the main menu, navigate to Monitor > Troubleshooting & Diagnostics > Scripts > Patch/Diagnostic Scripts.

  2. Scroll down to System Uploaded Scripts or Patch Scripts.

  3. Select the script to be applied and click Apply Patch.

  4. A confirmation window will pop up. Click Yes to continue.

  5. A message confirmation will appear. Click OK to finish.

  6. Under System Uploaded Scripts or Patch Scripts, the Applied On column will confirm the patch has been recently applied.

    Note: When the RUCKUS engineers are developing a new script, they will be required to know which scripts have already been applied to the controller, so they can consider these scripts when creating the new one. Make sure this information is shared with RUCKUS Support before the new patch/diagnostic script is created and applied.