Deleting Cluster Redundancy - Active-Active from a target Active Cluster

To delete a target active cluster from active-active cluster redundancy mode, perform these steps.
5.0 Update
  1. From the main menu, navigate to Network > Data and Control Plane > Cluster.
  2. Select the cluster, and click the Configuration tab.
  3. On the right side of the Configuration area, click Configure.
    The Edit Cluster page is displayed.
  4. Toggle the Enable Cluster Redundancy switch to ON.
  5. From the Type field, select either Active-Standby or Active-Active type of cluster.
  6. From the Target Active Cluster list, select the cluster and click Delete.