Removing an HDD Carrier from the Chassis
Follow these steps to remove a hard disk drive carrier from the chassis.
- Remove the front bezel (see Removing the Front Bezel).
- Select the drive bay where you want to install or replace the drive.Drive bay 0 must be used first, then drive bay 1 and so on. The drive bay numbers are printed on the front panel below the drive bays.
- Remove the drive carrier by pressing the green button to open the lever.
(See A in Removing the drive carrier).
- Pull the drive carrier out of the chassis.
%20Controller%20Administration%20Guide,%207.1.0_v3_GUID-47E44113-4535-4497-827E-98E318B6F0FA/Removing%20the%20Drive%20Carrier=GUID-12886146-B946-4EC0-8C94-6D0AD0DA48A0=1=en-US=Low.png)