Port Group Configuration in Physical Appliances
SZ-144 appliance has the option to configure the network interface in two different port-group layouts:
• Layout 1: One port group.
Management and AP tunnel combined.
• Layout 2: Two port groups:
Port Group 1, for Management and AP control.
Port Group 2, for AP tunnel data.
Refer to the SZ-100 or SZ-144 Quick Setup Guide document for port configuration instructions.
Note: The port group configuration for SZ144 cannot be modified after the controller has been put into operation. If changes are necessary, do revert the controller to its factory defaults and proceed with the reconfiguration process. Refer to the RUCKUS SmartZone Troubleshooting and Diagnostics Guide, for comprehensive instructions on changing the interface configuration for a working controller.
%20Controller%20Administration%20Guide,%207.1.0_v3_GUID-47E44113-4535-4497-827E-98E318B6F0FA/OnePortGroup=GUID-2D76E821-EAB9-4314-86ED-83D26E34517C=1=en-US=Low.png)
%20Controller%20Administration%20Guide,%207.1.0_v3_GUID-47E44113-4535-4497-827E-98E318B6F0FA/TwoPortGroup=GUID-7BFAE755-0F59-46F3-8624-B96FF596B9D5=1=en-US=Low.png)