Physical Network Interfaces

The vSZ-E, and SZ-144 use one, single, logical interface for Management, Control, and Cluster aspects.

For Virtual SmartZone High Scale (vSZ-H) there is a chance to optionally configure different physical network interfaces for the Control, Management, and Cluster functions separately. This enhances the network performance at a hardware level by separating control, cluster, and management traffic. This is recommended mostly for high-density deployments with a large number of Access Points, heavily utilized Data services, or network policies in the company to keep the traffic in separate network domains. In these scenarios, the IP addresses of the three interfaces must belong to different subnets.

Note: The configuration of separate physical interfaces for Control, Management, and Cluster functions in vSZ-H cannot be altered once the controller is deployed. If adjustments are required, please restore the controller to its factory defaults and perform a new configuration. Refer to the RUCKUS SmartZone Troubleshooting and Diagnostics Guide for comprehensive instructions on changing the interface configuration for a working controller.