The controller maintains an internal log file of current events and alarms, but this
internal log file has a fixed capacity. Configure the log settings so you can keep
copies of the logs that the controller generates.
At a certain point, the controller will start deleting the oldest entries in log file
to make room for newer entries. If you want to keep a permanent record of all alarms
and events that the controller generated, you can configure the controller to send
the log contents to a syslog server on the network.
Follow these steps to configure the remote syslog server:
- Go to .
- Select the
Enable logging to remote syslog server check box.
- Configure the settings as explained in the following table.
- Click OK.
Syslog Server
Configuration Settings
| Field |
Description |
Your Action |
| Primary
Syslog Server Address |
Indicates the syslog server on the network. |
- Enter
the server address.
- Enter
the Port number.
- Choose the Protocol type.
- Click
Ping Syslog Server. If the syslog server is
reachable, a flashing green circle and the message
Success appears after the button.
|
| SecondarySyslog
ServerAddress |
Indicates the backup syslog server on the
network, if any, in case the primary syslog server is
unavailable. |
- Enter
the server address.
- Enter
the Port number.
- Choose the Protocol type.
- Click
Ping Syslog Server. If the syslog server is
reachable, a flashing green circle and the message
Success appears after the button.
|
| Application Logs Facility |
Indicates the facility for application logs. |
- Select the
option from the drop-down. Range: 0 through 7.
- Select one
of the following Filter Severity:
- Emerg
- Alert
- Crit
- Error
- Warning
- Notice
- Info
- Debug: Default option
|
| Administrator Activity Logs Facility |
Indicates the facility for administrator
logs. |
- Select the
option from the drop-down. Range: 0 through 7.
- Select one
of the following Filter Severity:
- Emerg
- Alert
- Crit
- Error
- Warning
- Notice
- Info
- Debug: Default option
|
| Other
Logs Filter Severity |
Indicates the facility for comprehensive
logs. |
Select one of the following Filter
Severity: - Emerg
- Alert
- Crit
- Error
- Warning
- Notice
- Info
- Debug: Default option
|
| Event
Facility |
Indicates the facility for event logs. |
Select the option from the drop-down. Range:
0 through 7. |
| Event
Filter |
Indicates the type of event that must be sent
to the syslog server. |
Choose the required option: - All
events — Send all controller events to the
syslog server.
- Alleventsexceptclientassociation/disassociationevents — Send all controller events (except
client association and disassociation events) to the
syslog server.
- All
events above a severity — Send all controller
events that are above the event severity to the
syslog server.
|
| Event
Filter Severity applies to Event
Filter > All
events above a severity |
Indicates the lowest severity level. Events
above this severity level will be sent to the syslog server. |
Select the option from the drop-down. - Critical
- Major
- Minor
- Warning
- Informational
- Debug: Default option
|
| Priority |
Indicates the event severity to syslog
priority mapping in the controller. |
Choose the Syslog
Priority among Error, Warning, Info
and Debug, for the following event severities: - Critical
- Major
- Minor
- Warning
- Informational
- Debug
|