Logging in to the Web Interface
Before you can log in to the controller web interface, you must have the IP address that you assigned to the Management (Web) interface when you set up the controller on the network using the Setup Wizard.
Once you have this IP address, you can access the controller web interface on any computer that can reach the Management (Web) interface on the IP network.
Complete the following steps to log in to the controller web interface.
- Start a web browser on a computer that is on the same subnet as the Management (Web) interface.
- In the address bar, enter the IP
address that you assigned to the Management (Web) interface, and append a colon
(:) and 8443 (the management port number of the controller) to the end of the
address.
For example, if the IP address that you assigned to the Management (Web) interface is 10.10.101.1, you should enter: https://10.10.101.1:8443.
Note: The controller web interface requires an HTTPS connection. You must append "https" (not "http") to the Management (Web) interface IP address to connect to the controller web interface. Because the default SSL certificate (or security certificate) that the controller is using for HTTPS communication is signed by RUCKUS and is not recognized by most web browsers, a browser security warning may be displayed.The controller web interface logon page is displayed.
- Log in to the controller web interface using the following credentials:
- Click Log
On.
The controller web interface displays the Dashboard, which indicates that you have logged on successfully.