Deployment Scenario 7: Removing Links from a Live SPX LAG and Converting the LAG to an SPX Port

The following show spx output shows one SPX LAG between PE 17 and PE 18 (17/3/1, 17/3/2, 17/3/3 = 18/3/1, 18/3/2, 18/3/3). Use the following procedure to convert an SPX LAG to an SPX port link, in this case, between 17/3/1 and 18/3/1. 

ICX7750-48F Router# show spx
T=22d10h11m52.0: alone: standalone, D: dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment                   
1  S ICX7750-48XGF active  cc4e.24d0.3500 128 local   Ready
2  S ICX7750-48XGC standby 609c.9f1f.df00 128 remote  Ready
3  S ICX7750-48XGF member  cc4e.246e.d580   5 remote  Ready
17 S ICX7450-48GF  spx-pe  cc4e.246d.1178 N/A remote  Ready
18 S ICX7450-48P   spx-pe  cc4e.246d.22b8 N/A remote  Ready
19 S ICX7250-48P   spx-pe  cc4e.24b4.32e8 N/A remote  Ready
20 S ICX7450-24P   spx-pe  cc4e.248b.11e0 N/A remote  Ready
21 S ICX7250-24P   spx-pe  cc4e.24b4.7f20 N/A remote  Ready
22 D ICX7250-48    spx-pe  cc4e.24b4.4350 N/A remote  Ready

    active                    standby                                          
     +---+        +---+        +---+                                           
 -3/1| 1 |3/4--3/1| 3 |3/4--3/1| 2 |3/4-                                       
 |   +---+        +---+        +---+   |                                       
 |                                     |                                       
 |-------------------------------------|                                       
            +----+        +----+        +----+        +----+        +----+     
  1/1/5==2/1| 17 |3/1==3/1| 18 |2/3--2/1| 19 |2/3--2/3| 20 |1/1--1/1| 21 |2/2- 
            +----+        +----+        +----+        +----+        +----+   | 
                                                                             | 
                                                                    +----+   | 
                                                         1/1/13--2/1| 22 |2/2- 
                                                                    +----+

  1. Output for the show running-config command shows the existing SPX port link between PE 17 and PE 18. 
    ICX7750-48F Router# show running-config 
Current configuration:
!
ver 08.0.50B14T203
!
stack unit 1
  module 1 icx7750-48-xgf-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  module 3 icx7750-6q-6port-qsfp-240g-module
  priority 128
  default-ports 1/3/1 1/3/4
  stack-port 1/3/1 1/3/4
stack unit 2
  module 1 icx7750-48-xgc-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  module 3 icx7750-6q-6port-qsfp-240g-module
  priority 128
  default-ports 2/3/1 2/3/4
  stack-port 2/3/1 2/3/4
stack unit 3
  module 1 icx7750-48-xgf-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  module 3 icx7750-6q-6port-qsfp-240g-module
  priority 5
  default-ports 3/3/1 3/3/4
  stack-port 3/3/1 3/3/4
spx unit 17
  module 1 icx7450-48f-sf-port-management-module
  module 2 icx7400-xgf-4port-40g-module
  module 3 icx7400-xgf-4port-40g-module
  module 4 icx7400-xgf-4port-40g-module
  spx-lag 17/2/1 17/2/3
  spx-lag 17/3/1 to 17/3/3|--spx lag connected to PE 18
spx unit 18
  module 1 icx7450-48p-poe-management-module
  module 2 icx7400-xgf-4port-40g-module
  module 3 icx7400-xgf-4port-40g-module
  module 4 icx7400-qsfp-1port-40g-module
  spx-port 18/2/3
  spx-lag 18/3/1 to 18/3/3|--spx lag connected to PE 17
  2. Use the multi-spx-port command to convert the SPX LAG to an SPX port. 
    ICX7750-48F Router(config)# spx unit 17
ICX7750-48F Router(config-spx-unit-17)# multi-spx-port 17/3/1 and 18/3/1
Warning! multi-spx-port may cause some PEs to be unreachable. Please verify topology after change.
spx-lag 18/3/1 to 18/3/3 is replaced by spx-port 18/3/1.
spx-lag 17/3/1 to 17/3/3 is replaced by spx-port 17/3/1.
  3. Output for the show running-config command reflects the SPX LAG-to-SPX port conversion. 
    ICX7750-48F Router# show running-config
Current configuration:
!
ver 08.0.50B14T203
!
stack unit 1
  module 1 icx7750-48-xgf-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  module 3 icx7750-6q-6port-qsfp-240g-module
  priority 128
  default-ports 1/3/1 1/3/4
  stack-port 1/3/1 1/3/4
stack unit 2
  module 1 icx7750-48-xgc-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  module 3 icx7750-6q-6port-qsfp-240g-module
  priority 128
  default-ports 2/3/1 2/3/4
  stack-port 2/3/1 2/3/4
stack unit 3
  module 1 icx7750-48-xgf-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  module 3 icx7750-6q-6port-qsfp-240g-module
  priority 5
  default-ports 3/3/1 3/3/4
  stack-port 3/3/1 3/3/4
spx unit 17
  module 1 icx7450-48f-sf-port-management-module
  module 2 icx7400-xgf-4port-40g-module
  module 3 icx7400-xgf-4port-40g-module
  module 4 icx7400-xgf-4port-40g-module
  spx-lag 17/2/1 17/2/3
  spx-port 17/3/1|--spx port connected to PE 18
spx unit 18
  module 1 icx7450-48p-poe-management-module
  module 2 icx7400-xgf-4port-40g-module
  module 3 icx7400-xgf-4port-40g-module
  module 4 icx7400-qsfp-1port-40g-module
  spx-port 18/2/3					
  spx-port 18/3/1|--spx port connected to PE 17
Parent topic: Deployment Scenarios