Designating Ethernet Port Type
You can manage VLAN processing with Trunk,
Access, and General ports on the Unleashed APs.
Ethernet ports are defined as one of the following port types:
All three port types are used to define how to manage the following two aspects of VLAN processing:
- Which VLANs are processed versus dropped
- What to do with untagged packets (in other words, Native VLAN)
For most of the RUCKUS APs, you can set which ports you want to be your Access, Trunk and General Ports from the Unleashed web interface, as long as at least one port on each AP is designated as a Trunk Port.
Note: By default, all ports are enabled as Trunk
Ports with Untag VLAN set as 1 (except for Wall Plate APs, whose four front-bottom
ports are enabled as Access Ports by default, and whose rear port is a Trunk Port
and is non-configurable).
- If configured as an Access Port, all untagged ingress traffic is sent to the configured Untag VLAN, and all egress traffic is sent untagged.
- If configured as a Trunk Port, all untagged ingress traffic is the configured Untag VLAN (by default, 1), and all VLAN-tagged traffic on VLANs from 1 through 4094 will be seen when present on the network.
The default Untag VLAN for each port is VLAN 1. Change the Untag VLAN to: