Moving an AP from the Inventory Window

Complete the following steps to move an AP to different clusters and zones.
Note: The Move AP functionality is not supported on APs with R3.1.2 and R3.2.1 firmware versions.
  1. On the menu, go to Inventory and select the APs tab.
    The Inventory window is displayed.
  2. In the APs tab, select an AP that needs to be redirected to a different cluster and click the icon.
    The Move AP dialog box is displayed.
    Change the image with different cluster name at the bottom.

    The Move AP dialog box displays the current configuration details of the AP.

  3. From the Cluster list, select the required cluster to which you want to redirect the AP.
  4. From the Zone list, select the required AP zone to which you want to redirect the AP.
    The domain hierarchy is displayed in the list. You can select a zone under a specific domain and it helps you to route APs to the right controller and zone within that cluster.
  5. From the Group list, select the required group to which you want to redirect the AP.
    Note: Moving an AP to the Group level is supported in SmartZone 3.6.2 and later versions.
  6. Click Move to change the cluster and zone of the AP.
    An information dialog box is displayed indicating that the AP is successfully moved to the specified cluster.
  7. Click Ok to complete the action.
Parent topic: Working with Clusters and APs