Configuring Registration Rules Based on AP Model

Complete the following steps to add APs to a cluster based on AP model.
  1. On the menu, go to Inventory > AP Reg. Rules.
    The AP Registration Rules window is displayed.
  2. In the AP Model tab, click the icon.
    The Add New AP Model Rule dialog box is displayed.
  3. Complete the following fields to add a registration rule based on AP model.
    • Cluster: From the list, select a cluster to which you want to add the AP.
    • Zone: From the list, select an AP zone.
    • Group: From the list, select a group to which you want to add the AP.
      Note: Adding a new AP to the Group level through Configuring Registration Rules Based on AP Model is supported in SmartZone 3.6.2 and later versions.
    • Model: Enter an AP model or select the AP model from the list.
      Note: Select or enter only existing RUCKUS AP models.
    The domain hierarchy is displayed in the list. You can select a zone under a specific domain and it helps you to route APs to the right controller and zone within that cluster.
    Note: If cluster and zone details are not provided, RUCKUS Network Director will route the AP to the default cluster.
  4. Click Add to add the new AP model rule.
    An information dialog box is displayed indicating that the AP model is successfully created.
  5. Click Ok.
Parent topic: AP Registration Rules