Zero Touch Deployment Setup Example

  1. Backup the Unleashed configuration via Unleashed UI or you can register the Unleashed to UMM and backup the Unleashed configuration via UMM backup task and download it to your laptop.
  2. Provision the Zero Touch Deployment rule on UMM server.
    1. Log in to UMM WebUI and go to the Unleashed-Zero Touch Deployment page.
    2. Click the Create button to create a new Zero Touch Deployment rule.
    3. Enter the Deployment Rule name and select the Device Group from the Assign To Group drop-down menu.
      Whenever UMM apply this rule, it will move the Unleashed to the selected group automatically. And if your group is not in the list, you can click a icon to add the new group.
    4. Enter the Deployment Rule name and select the Device Group from the Assign To Group drop-down menu.
    5. Enable the Restore Configuration option and select the configuration file from the drop-down menu or click () to upload new Restore configuration file.

      Restore Configuration

    6. Match the Config Template Name with the Config Template Name received from Unleashed and make sure to provision the same 'Config Template Name' on both UMM and Unleashed.
    7. Use the Mac Address List to match the rule against Unleashed Master AP and Click OK to save the rule.
  3. Initiation of Unleashed manually.
    1. Power up the AP.
    2. In the Setup Wizard, click UMM Install and enter the following parameters:
      • UMM Domain/IP: the IP of the UMM server.
      • Config Template Name: make sure that the name inside the UMM rule matches to the Zero Touch Deployment rule in the UMM server.
      • System Name: the name of your Unleashed.
    3. Click Next to connect the Unleashed to the UMM server and the configuration file downloads automatically.
  4. Initiate Unleashed AP by DHCP
    1. Add the following options to the DHCP configured file (etc/dhcp/dhcpd.conf)
      option space ruckus_info;
      option ruckus_info.ummtag code 2 = text;
      option ruckus_info.ummiplist code 1 = text;
      vendor-option-space ruckus_info;
      option ruckus_info.ummiplist "ummtest1.com, 10.223.5.230:9444";     //the UMM IP
      option ruckus_info.ummtag "noupgrade";		// the Config Template Name
    2. Make sure the AP is in set factory status before powering on the AP.
      AP receives the UMM IP and Config Template Name from the DHCP server and the Zero Touch Deployment is initiated.
  5. Whenever there is an Unleashed match the Zero Touch Deployment rule, UMM creates a Zero Touch Deployment task in the Task page and displays the status of the deployment.
  6. Check the status of Zero Touch Deployment in the task page.
    Whenever there is an Unleashed match the Zero Touch Deployment rule, UMM creates a Zero Touch Deployment task in the Task page.

    List of Tasks