Viewing Devices Managed by UMM

The Devices page of the Web interface displays information about devices managed by Unleashed Multi-Site Manager software. These devices include ZoneDirector controllers, ICX switches managed by Unleashed, Unleashed APs and Clients.
UMM 2.2
  1. Follow these steps to view the devices manage by the software:
  2. After you to log in to the web interface, select Devices from the navigation bar.

    You can use the View Mode to select how you want the device information to be presented:

    • List: Displays the list of all devices irrespective of the group to which they belong.

      Group: Displays the list of devices in a hierarchical format.

    Devices Managed by Unleashed Multi-Site Manager: List View

    Devices Managed by Unleashed Multi-Site Manager: Group View

    Located above the right side of the table are two icons:

    • Click the () icon to select and deselect the contents of the table, select the number of rows to show, and manage the Search function criteria.
    • Click the Refresh icon () to refresh the contents of the table.

    The following table lists some of the fields and table columns that appear by default.

    Managed Devices

    Field/Column Description
    Name Displays the name of the device (may be a ZoneDirector controller or an Unleashed network that UMM manages).

    Clicking the device name hyperlink opens the dashboard of the controller in a new page.

    Member Count Displays the number of connected, disconnected or pending APs that are managed by the ZoneDirector controller or the Unleashed network.
    ICX Switches Count Displays the number of connected, disconnected or pending ICX switches managed by Unleashed.
    Port Status Displays the port status of the switch
    Serial Number Displays the serial number of the device.
    Connection Indicates whether the device is currently online ( blue) or offline ( red).
    SSH Connection Indicates the status of the SSH tunnel between Unleashed Multi-Site Manager and ZoneDirector or Unleashed devices.
    Management IP Displays the Management IP address of ZoneDirector and Unleashed devices.
    MAC Address
    UMM 2.4
    Displays the MAC address of ZoneDirector and master AP's MAC address for Unleashed devices.
    External IP Displays the IP address of the device when it is behind the NAT server. Unleashed Multi-Site Manager uses this IP address to manage the device. For ZoneDirector or 200.5 Unleashed devices that are behind NAT, include port 443 for port forwarding.
    Tag When configured, this column shows a generic attribute (Device Tag) that can be used to identify the device. For example, when this AP device is located in a main office, you can assign the tag “Main” to it.
    IP Address Displays the IP address assigned to the device.
    Note: The port number after the IP address indicates the protocol that you can use to gain access to web interface of the device. If :443 is displayed after the port number, you can access the device Web interface using:
    https://{device-IP-address}.
    IPv6 Address Displays the IPv6 address of the device.
    Model Displays the model number of the managed RUCKUS device.
    Working Mode
    2.7 update
    Shows the master AP working mode as Bridge or Gateway. Unleashed 200.13 has three working modes: Bridge, Gateway and Dedicated Master mode.
    Last Seen Displays the time stamp of the device when it was last online.
    Uptime Displays how long since the device was last rebooted.
    Redundancy State Indicates the status of the Dedicated mode smart redundancy and ZoneDirector smart redundancy.
    Latitude Displays the latitude (North-South position) of the device.
    Longitude Displays the longitude (East-West position) of the device.
    Location Displays the location of the device (if provided).
    Software Displays the software version that is installed on the device.
    Support Status Displays the support status for the device.
    Licenses Consumed Displays the number of licenses consumed by the device.
    Inventory Status Displays the permission that is assigned to the device, such as Permitted, License Exceeded, and Lost Device.

    By clicking the () icon, you can customize the table settings that are displayed. You must select the check boxes to display the columns in the table and enter the number of rows you want to display in the table, in addition to specifying the search criteria.

    Customizing the Table Settings

    To search for information in the table, enter word or phrase in the Search field. The page refreshes and displays devices with attributes that matched your search keyword or keyphrase. The matching attributes are highlighted and Unleashed Multi-Site Manager displays up to ten search results on each page by default. The number of rows is customizable. When your search generates more results than the number of rows set, use the left arrow and right arrow buttons after the Search box to display the previous page or next page, respectively.