Viewing Audit Logs
Audit logs describe configuration actions that were performed on the software and identify the users who initiated each action. Auditing is an important function that can help you determine when a configuration change was made and by whom in order to troubleshoot possible issues. The log is shown as per time sequence.
The Audit Log page displays the following:
- Audit Type: describes the user action that was performed such as a user logging off and so on.
- Severity: describes the severity of the event as High, Low and Normal.
- Time: displays the time when the event took place.
- User: displays the email ID or name of the user who initiated the event.
- Message: displays user notes included while initiating the event.
Audit Log Entries
| Audit Type | Description |
|---|---|
| Task creation error occurred | User created a provisioning task, but it failed. |
| Configuration upgraded | User created a configuration upgrade task. |
| Firmware upgraded | User created a firmware upgrade task. |
| Device rebooted | User created a reboot task. |
| Device reset to factory default | User created a factory reset task. |
| Configuration settings updated | User updated a device's configuration from the Device View. |
| User logged in | User logged into the software Web interface. |
| User failed to log in | User failed to log into the software Web interface. |
| User logged out | User logged out of the software Web interface. |
| User account created | Administrator created a new user account. |
| User account updated | Administrator updated a user account. |
| User account deleted | Administrator deleted a user account. |
| Device log file retrieved | User retrieved an AP's log file from the Device View. |
| Device log file emailed | User sent out an AP's log file via email. |
| Device ping test performed | User performed a PING test from the Device View. |
| VLAN settings updated | User updated the AP's VLAN settings from the Device View. |
| Audit log emailed | User sent out software's audit log via email. |
| License file verification | The maximum number of devices supported by your software license has been reached. To manage additional devices, contact your Ruckus Sales representative and obtain a license for additional devices. |
| License file uploaded | User uploaded a new license file into the software. |
| Device registered | A device registered with the software. |
| Inventory file imported | User imported an inventory file (XLS) into the software. |
| Firmware file imported | User uploaded new firmware image files. |
| Configuration template created or updated | User edited the configuration template. |
| Device group created or updated | User created or updated the device group. |
| Device tag created or updated | User created or updated a tag name. |
| Task canceled | A user-created task has been canceled. |
| Approval mode updated | User updated the AP approval mode on the Inventory page |
| New event occurred | User created a new event. |
| Auto configuration rule created | User created a new auto-configuration rule. |
| Controller configuration obtained | User performed "obtain Controller configuration" from a controller device. |
| SSL certificate uploaded | User uploaded an SSL certificate to the software. |
| Inventory status created | User created an inventory status. |
| Inventory status modified | User updated an inventory status. |
| Inventory status assigned | User changed a n AP's inventory status. |
| Inventory comment assigned | User edited an AP's comment on the Inventory page. |
| Inventory status deleted | User deleted an inventory status. |
| Controller configuration cloned | User created a "Clone Controller" task. |
| Device authenticated | UMM authenticates the device successfully. |
| Managed group created | User created a group for delegated management. |
| Managed group updated | User updated a group for delegated management. |
| Managed group deleted | User deleted a group for delegated management. |
| Managed group device(s) added | User assigned devices to a managed group. |
| Managed group device(s) removed | User removed devices from a managed group. |
| User group mapping updated | User changed the "user account" and "managed group" mapping. |
| User logged in via the Northbound interface | A 3rd party system logged into the software via the Northbound interface. |
| User logged out via the Northbound interface | A 3rd party system logged out of the software via the Northbound interface. |
| Northbound interface operation invoked | A 3rd party system invoked the Northbound interface. |
| Upgrade script started | User installed a patch on the software server. |
| Upgrade successful | User patched the software successfully. |
| Upgrade failed | User patch for the software failed. |
| ZoneDirector could not be reached | The software could not reach a managed ZoneDirector. |
| Task deleted | User deleted a task. |
| Task restarted | User restarted a failed task. |
| Automatic report created or updated | User created an automatic report. |
| Automatic report emailed success | Automatic report is emailed successfully. |
| Automatic report emailed failed | Automatic report email is failed. |
| System log emailed | System log is emailed. |
| Connectivity of devices emailed | Connectivity of devices is emailed. |
| Connect to Controller fail | The software not able to connect to controller. |
| A new Controller template created | User creates a new controller template. |
| A Controller template updated | User updates a controller template. |
| A Controller template deleted | User deletes a controller template. |
| Automatic report ftp uploaded success | Saved report is successfully uploaded to FTP server. |
| Automatic report ftp uploaded failed | Saved report fails to upload to the FTP server. |
| Automatic report local file saved | User saves Automatic report local file. |
| Alarm notification emailed | UMM has send out the alarm via email. |
| Backup database | Backup the database by the User. |
| Restore database | Restore the database by the User. |
| Purge job failed | Purge job is failed. |
| License delete | User can delete a license. |
| Group create | User can create a group. |
| Group modify | User can modify a group. |
| Group delete | User can delete a group. |
| Device settings modify | User can modify the device settings. |
| Device delete | User can delete a device. |
| Device edit WLAN | User can edit the controller's WLAN. |
| Device block | User can block the device. |
| Device unblock | User can unblock the device. |
| Device backup | User can back up the device. |
| Device restore | User can restore the device. |
| Device upgrade | User can upgrade the device. |
| Rule create | User can create a rule. |
| Rule update | User can update a rule. |
| Rule delete | User can delete a rule. |
| Rule import | User can import a rule. |
| Zero touch backup file upload | Zero Touch Deployment Unleashed configuration file is uploaded to UMM. |
| Zero touch backup file delete | Zero Touch Deployment Unleashed configuration file is deleted from UMM. |
| Report create | User can create a report. |
| Report update | User can update a report. |
| Report delete | User can delete a report. |
| Report generate | User can generate a report. |
| Cert update | User can update a certificate. |
| Cert import | User can import a certificate. |
| Cert Restore | User can restore a certificate. |
| Device Registration | User can register a device. |
| Maps Settings | Map setting is changed. |
| Device Backup | User can back up a device. |
| Memory Optimization Settings | Memory Optimization Settings is changed. |
| UE Session Settings | UE Session Settings is changed. |
| Security Code | Security code is reset. |
| Logo Settings | Logo Settings is changed. |
| SMTP Settings | SMTP Settings is changed. |
| Purge policy | Purge policy is changed. |
| Tacacs+ Settings | Tacacs+ Settings is changed. |
| FTP Settings | FTP Settings is changed. |
| SNMP V2 Settings | SNMP V2 Settings is changed. |
| SNMP V3 Settings | SNMP V3 Settings is changed. |
| SNMP Trap Enable Settings | SNMP Trap Enable Settings is changed. |
| SNMP Trap Settings | SNMP Trap Settings is changed. |
| Events & Alarms selection | Alarm Event selection settings is changed. |
| Flexera server setting | UMM license is changed via Flexera server. |
| Download system full logs | System full logs are downloaded. |
| Alarm Light Setting | Alarm Light Setting is changed. |
| Alarm Email Notification | Alarm Email Notification is changed. |
| User Customized Alarm | User Customized Alarm is changed. |
| Alarm Event Selection | Alarm Event Selection is changed. |
| Alarm Acknowledge | User acknowledges the alarm. |
| Event configuration create | User can create an event configuration. |
| Event configuration update | User can update an event configuration. |
| Event configuration delete | User can delete an event configuration. |
| Event configuration assign controllers | ZD is assigned to an Event configuration group. |
| Task create | User can create a task. |
| Task update | User can update a task. |
| Task delete | User can delete a task. |
| Download backup file | User can download a backup file. |
| Saved backup file | User can save a backup file. |
| Backup file ftp uploaded success | User successfully uploaded a backup file ftp into the software. |
| Backup file ftp uploaded failed | User failed to upload a backup file ftp into the software. |
| User create | User can be created. |
| User update | User can be updated. |
| User delete | User can be deleted. |
| Device redirect | User is redirected from UMM to devices. |
| Add indoor map | Indoor map is added. |
| Update indoor map | Indoor map is updated. |
| Delete indoor map | Indoor map is deleted. |
| Database backup file delete | User can delete a database backup file. |
| User failed to log in. | User used an incorrect password to log in to the software three times. |
| Automatic report emailed | Automatic report has been sent out. |
| Notify third-party Settings | User Update Notify third-party Configuration |