Zero Touch Deployment

The Unleashed Zero Touch Deployment feature simplifies the deployment for Unleashed. When the power is on, the deployment is ready with some simple configurations on the Unleashed Multi-Site Manager and Unleashed side.

The primary purpose of this feature:

  • Unleashed can be configured to a designated version and configured automatically after powering on.
  • Unleashed can be assigned to designated groups by joining Unleashed Multi-Site Manager automatically.
  • It allows manual pre-configure of the 'Configure Template Name' and 'UMM IP' on the Unleashed by Unleashed Setup Wizard or by DHCP server.
  • It also pre-configured a rule with the same 'Configure Template Name' on the UMM server and attached one Unleashed backup file.
  • Whenever a set factory Unleashed boots up, it sends a message with 'Configure Template Name' to the UMM server according to the IP inside the parameter 'UMM IP'. Once the UMM server receives the message, it matches the rule with 'Configure Template Name' against its database and pushes the configure file to Unleashed.
  • For the Unleashed 200.7 or previous release Unleashed, which does not support the new parameters 'Configure Template Name' and 'UMM IP,' can pre-configure a rule with Unleashed master AP's MAC address to UMM. When the Unleashed registers to UMM for the first time, UMM matches the rule against the MAC address and pushes the configuration file to Unleashed.