If Your Network Uses SNMPv3
- Click the tab.
- Under
SNMP v3 Settings, configure the following settings:
- User Name: Enter a user name between 1 and 31 characters long.
- Auth Protocol Select MD5, SHA or NONE authentication method (default is MD5).
- Auth Password: Enter a passphrase between 8 and 32 characters long.
- Priv Protocol: Select DES, AES or NONE.
- Priv Password: If either DES or AES is selected, then enter a Privileged Password between 8 and 32 characters long.
- Read: Select this check box to enable SNMP read access.
- Trap: Select this check box to send SNMP traps to the trap server on the network.
- Click Save to save your changes.
- Under SNMP Trap, configure the following settings:
- Click Save to save your changes.