Restoring the Device Configuration
Restoring device settings from a backup file overwrites the current settings with those contained in the backup file. When performing the restore procedure, make sure that you are restoring the correct backup file.
Also ensure that you are selecting the appropriate restore type. For example, when you only want to restore the wireless, access control, and user settings, make sure you select Policy Restore. Selecting Full Restore overwrites all existing device settings, including the IP address, system name, username, and password.
An ‘Unleashed ID’ is automatically generated by the system for each Unleashed network. This ID is reset when the device is set to factory default, and may be overwritten when device configuration is restored (depend on which restore option are selected).
- After you to log in to the Web interface, select
Devices from the menu in the left.
The Devices page appears listing all the devices managed by the software.
- From the list of devices, select the device for which you want to restore the configuration values and then click Backup & Restore.
- In Choose an Operation, select Restore.
- In
Configuration File Settings, enter the following:
- Task Name: This field is prefilled with a task name using the syntax restoreYYYYMMDDHHMMSS, but you can change the name of the task, if desired. Use a descriptive name that helps you identify this task.
- Restore Type: choose one of the following:
- Full
Restore: Restores all settings from the backup file,
including the IP address, system name, username, and password.
Use this restore type to overwrite all current settings of a
device with those from the backup file. For example, if the
configuration file of a device becomes corrupted, then you can
use full restore to recover the device.
The unleashed ID will be overwritten during Full Restore.
- Failover Restore: Restores all settings from the backup file, except the system name, IP address, username, and password. Use this restore type when you want to configure a secondary device as a failover unit. After configuring the secondary device, deploy it to the same network as the primary device. If the primary device fails for any reason, then all APs managed by the primary device are able to report to the secondary device automatically. If you choose this restore type, then you need to manually configure the IP address, system name, username and password of the secondary device.
- Policy Restore: Restores only the wireless, access control, role, and user settings from the backup file. Use this restore type when you want to apply the same set of common settings to multiple devices. You need to first configure one device with your preferred wireless, access control, role, and user settings, back up these settings, and then restore them onto the target devices.
- Full
Restore: Restores all settings from the backup file,
including the IP address, system name, username, and password.
Use this restore type to overwrite all current settings of a
device with those from the backup file. For example, if the
configuration file of a device becomes corrupted, then you can
use full restore to recover the device.
- Device Selection: from the drop-down menu, choose the target configuration file to restore.
- In Specify time for this task, specify when you want the task to run. To run the task immediately, click Restore now. To schedule the task, click Schedule restore later and then select the date and time.
- Click OK.
- Click
OK.
The configuration restore task is created.
