Viewing Rogue Devices

Rogue client page - 5.1.2 (FIPS/NonFIPS) update

To view the rogue APs or rogue clients, select Access Point or Client from the Device Type list.

If the user has enabled rogue AP detection, a zone is configured for monitoring (refer to Configuring Monitoring APs), click Report > Rogue Devices. Under Device Type, select Access Point or Client. The Rogue Devices page displays all the rogue APs or rogue clients that the controller has detected on the network, including the following information:

  • Rogue MAC: The MAC address of the rogue AP.
  • Type: The client has a different set of rogue types (for example, rogue, normal rogue AP, not yet categorized as malicious or non-malicious).
  • Classification Policy: The rogue classification policy associated with the rogue AP.
  • Channel: The radio channel used by the rogue AP.
  • Radio: The WLAN standards with which the rogue AP complies.
  • SSID: The WLAN name that the rogue AP is broadcasting.
  • Detecting AP Name: The name of the AP.
  • Zone: The zone to which the AP belongs.
  • RSSI: The radio signal strength.
  • Encryption: Indicates whether the wireless signal is encrypted.
  • Detected Time: The date and time that the rogue AP was last detected by the controller.

Parent topic: Rogue Devices