Enabling LACP Support for an AP

Perform the following procedure to enable the LACP support for an AP.
  1. From the main menu, go to Network > Wireless, select Access Points. The Access Point page is displayed.
  2. Select an AP group from the zone.
  3. Select an AP and click .
  4. In the Edit AP page, enter the AP name.
  5. Under Configuration, select R720 from the Select an AP Model list.
  6. Under General Options, enable LACP.
    Note: By default, LACP is disabled.
    Note: To support the LACP and LAG feature on RUCKUS APs, ensure that the correct PoE mode is selected to bring up LAN1,2 ports. For example, PoE-at+ for R720, PoE-at for R710. The LACP and LAG UL throughput is limited to around 1Gbps.
  7. Click OK.
    Note: When you enable or disable LACP, the corresponding status is updated in the General tab of the Access Points page.
Parent topic: Link Aggregration Protocol (LACP)