Configuring NAT Pool Setting

In the controller virtual platform web interface go to Services > DHCP & NAT > NAT Profiles (DP).

Select the NAT profile from the list and click the Pools tab.

Click Create. The Create Pool Configuration page is displayed.

Configure the following:

General Options
- Pool Name: Type a name for the NAT pool settings that you want to create.
- Description: Type a description for the pool settings that you want to create.

Policy Options
- Policy Type: Select VLAN or VNI option.
  Note: For policy type choose one of the following:
  - Update the VLAN range.
  - Update the QinQ VLAN range.
  - Leave both the fields blank for RADIUS NAT server setup.
- Private VLAN Range: Type the VLAN range and click Add. Range: 1 through 4095. For example: 1 or 1-2.
- Private QinQ VLAN Range: Type SVLAN range, CVLAN range and click Add. Range: 2 through 4095. For example: 2 or 2-3.
  
  Note: This feature is supported only in vSZ-H platform.

Translation Options
- Port Range: Type the port range. Range: 10000 through 65534. For example: 10000-20000.
- Public Address Range: Type the public IP address range.
  
  Note: This public address must not be a duplicate of the other public addresses in the same subnet, which includes applied NAT profile and vSZ-D's Access and Core Interface Address.

Click OK.

You have created a NAT pool setting.