Approving Access Points

Access Points (APs) must be approved to join the system. The APs can be approved either automatically or manually.
Note: This feature is applicable only for SZ100 and vSZ-E platforms.

Approving Access Points Manually

To approve an AP manually, perform the following -

  1. Go to Network Wireless Access Points.
  2. On the left hand side, under System tree, scroll down and click on the Staging Zone.This displays all APs in the queue for approval.
  3. Clear the Automatically approve all join requests from APs check box.
  4. Click Ok.

Approving Access Points Automatically

To approve an AP automatically, perform the following -

  1. Go to Network Wireless Access Points.
  2. On the left hand side, under System tree, scroll down and click on the Staging Zone.
    This displays all APs in the queue for approval.
  3. Select the Automatically approve all join requests from APs check box.
  4. Click Ok.

In this section:

  1. Approving Mesh APs
    5.0 Update
    You can approve mesh APs that join the network using wireless connection.
  2. Viewing Mesh APs
    Mesh APs are wireless access points. They provide consistent transmission of data, any failures do not disrupt the data transmision.
Parent topic: AP Provisioning and Swapping