Link Aggregration Protocol (LACP)

In this section:

  1. Link Aggregation Control Protocol (LACP) support for R720 AP
  2. Enabling the LACP Support for a Zone
    Perform the following procedure to enable the LACP support for a zone.
  3. Enabling LACP Support for an AP
    Perform the following procedure to enable the LACP support for an AP.
  4. Enabling LACP Support for an AP Group
    Perform the following procedure to enable the LACP support for an AP group.
  5. Creating a Bond Port Profile
    A Bond port profile aggregates multiple network interfaces into a single logical interface. Existing Ethernet configurations must be removed before forming a bonding interface. As both Ethernet links should operate at the same speed, the link speed must be downgraded and should be set to 1 Gbps.
Parent topic: Global AP Settings