Creating Profile-based DHCP

DHCP profile is configured and accessed through Virtual SmartZone Data Plane (vSZ-D). The vSZ-D server assigns the IP address to the user equipment based on the profile rule. Different pools with the same subnet are created without overlapping the IP address range.
You must configure the following settings to create a DHCP profile.
Note: DHCP supports only access-side network.

In this section:

  1. Configuring DHCP Global Settings
    A DHCP profile can be used simultaneously by multiple segments and gateways in the network.
  2. Configuring DHCP Pool Settings
    For any DHCP pool, you can configure a primary subnet and any number of secondary subnets.
Parent topic: Working with DHCP