static-route

To create and configure static route settings, use the following command:

static-route WORD

Syntax Description

static-route
Create and configure a static route
name WORD
Set the name of the static route
subnet IP-SUBNET
Set the subnet for the destination network. Use a slash (/) to separate IP address and subnet
gateway GATEWAY-ADDR
Set the gateway address
show
Show a list of all static routes

Defaults

None.

Example

ruckus(config-sys)# static-route route1
The static route 'route1' has been created. To save the static route, type 'end' or 'exit'.
ruckus(config-static-route)# subnet 192.168.11.1/24
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-static-route)# gateway 192.168.11.1
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-static-route)# show
Static Route:
ID=
Name= route1
IP subnet= 192.168.11.1/24
IP gateway= 192.168.11.1

ruckus(config-static-route)#