Step 3: Log Into the CLI

  1. At the login as prompt, press <Enter> once.
  2. At the Please login prompt, enter the ZoneDirector login name (default: admin), and then press <Enter>.
  3. At the Password prompt, enter the ZoneDirector login password (default: admin), and then press <Enter>. The Ruckus ZoneDirector CLI welcome message and the ruckus> prompt appears.

You are now logged into the ZoneDirector CLI as a user with limited privileges. As a user with limited privileges, you can view a history of commands that were previously executed and ping a device. If you want to run more commands, you can switch to privileged mode by entering enable at the root prompt.

To view a list of commands that are available at the root level, enter help or ?.

Note: You can tell if you are logged into the CLI in limited or privileged mode by looking at the ruckus prompt. If you are in limited mode, the prompt appears as ruckus> (with a greater than sign). If you are in privileged mode, the prompt appears as ruckus# (with a pound sign).

To enable privileged mode when another user session is enabled, use the <force> option with the enable command to force disconnect of the previous user session. (i.e., enable force).