restrict-access-order-ipv6

To create a new IPv6 restrict access order or modify an existing restrict access order, use the following command:

restrict-access-order-ipv6 NUMBER

Syntax Description

restrict-access-order-ipv6
Add a restrict access order
NUMBER
Add this order ID
order NUMBER
Sets the hotspot rule order.
description WORD
Sets the hotspot rule description.
type allow
Sets the hotspot rule type to 'allow'.
type deny
Sets the hotspot rule type to 'deny'.
destination address IP-ADDR/WORD
Sets the destination address of a hotspot rule.
destination port NUMBER/WORD
Sets the destination port of a hotspot rule.
protocol NUMBER/WORD
Sets the protocol of a hotspot rule.
icmpv6 type [any|number NUMBER]
Sets the icmpv6 type of a hotspot rule.
show
Displays the policy rule.

Defaults

None.

Example

ruckus(config-hotspot)# restrict-access-order-ipv6 1
ruckus(config-hotspot-restrict-access)#
ruckus(config-hotspot-restrict-access-ipv6)# show
          Description=
          Type= Deny
          Destination Address= Any
          Destination Port= Any
          Protocol= Any
          ICMPv6 Type= Any
ruckus(config-hotspot-restrict-access-ipv6)#