show hs20op name

To display information about the named Hotspot 2.0 Operator, use the following command:

show hs20op name WORD

Syntax Description

show
Display information
hs20op name
Display specific Hotspot 2.0 Operator
WORD
The name of the HS2.0 operator

Defaults

None.

Example

ruckus# show hs20op name operator1
Hotspot 2.0 Operator:
  ID:
    1:
      NAME= operator1
      Description=
      Venue Group= Unspecified
      Venue Type= Unspecified
      ASRA Option:
        Status= Disabled
      Internet Option= Disabled
      Access Network Type= Private
      IPv4 Address Type= Not Available
      IPv6 Address Type= Not Available
      HESSID=
      Friendly Name List:
      Service Provider Profiles:
        ID= 1
          Name= provider1
      WAN Metrics:
        Enable Symmetric Link= Disabled
        WAN at Capability= Disabled
        Link Status= Link Up
        WAN Downlink Load= 0
        WAN Downlink Speed= 0
        WAN Uplink Load= 0
        WAN Uplink Speed= 0
        Load Measurement Duration= 0
      Connection Capability:
        Description= ICMP
          IP Protocol= 1
          Port Number= 0
            Status= Closed
        Description= FTP
          IP Protocol= 6
          Port Number= 20
            Status= Closed
        Description= SSH
          IP Protocol= 6
          Port Number= 22
            Status= Closed
        Description= HTTP
          IP Protocol= 6
          Port Number= 80
            Status= Closed
        Description= Used by TLS VPNs
          IP Protocol= 6
          Port Number= 443
            Status= Closed
        Description= Used by PPTP VPNs
          IP Protocol= 6
          Port Number= 1723
            Status= Closed
        Description= VoIP
          IP Protocol= 6
          Port Number= 5060
            Status= Closed
        Description= Used by IKEv2 (IPSec VPN)
          IP Protocol= 17
          Port Number= 500
            Status= Closed
        Description= VoIP
          IP Protocol= 17
          Port Number= 5060
            Status= Closed
        Description= May be used by IKEv2 (IPSec VPN)
          IP Protocol= 17
          Port Number= 4500
            Status= Closed
        Description= ESP, used by IPSec VPNs
          IP Protocol= 50
          Port Number= 0
            Status= Closed
        Additional Connection Capability:
      Advanced GAS Settings:
        GAS query response buffering time= 1000
        GAS DOS detection= Disabled
        GAS DOS maximum request number= 200
      Hotspot 2.0 Capability:
        Operatiing Class Indication= Unspecified

ruckus#