fw_upgrade

To upgrade the controller's firmware, use the following command:

fw_upgrade protocol://server ip|server name/path/image name [ -f ]

fw_upgrade OPTIONS

Syntax Description

fw_upgrade
Upgrade the controller’s firmware
protocol
Protocol for image transfer (FTP, TFTP, HTTP, KERMIT)
OPTIONS
-p
protocol
-s
server IP address or name
-n
image name with path on the server
-f
non-verbose mode
-h
fw_upgrade help message

Defaults

None.

Example

ruckus(debug)# fw_upgrade -p tftp -s 192.168.0.14 -n zd-upgrade.img
------------------------------------------------------------------------
 ** Starting CLI Upgrade  **
------------------------------------------------------------------------
        Protocol  : tftp
        Server IP : 192.168.0.14
        Image Name: zd-upgrade.img
------------------------------------------------------------------------
 ** Checking if memory is sufficient **
------------------------------------------------------------------------
.
----->Sufficient memory to perform upgrade
------------------------------------------------------------------------
 ** Downloading ZD image **
------------------------------------------------------------------------
.......................
...