ip

To set the AP’s IPv4 address, use the following command from within the config-ap context:

ip [enable|disable] addr IP-ADDR NET-MASK name-server DNS-ADDR mode [dhcp|static|keep]

Syntax Description

ip
Set the AP’s IPv4 addressing
enable
Enable IPv4 addressing
disable
Disable IPv4 addressing
addr
Set the AP’s IPv4 address
IP-ADDR
The IPv4 address
NET-MASK
The IPv4 netmask
name-server
Set the device’s DNS servers. Use a space ( ) to separate primary and secondary DNS servers
DNS-ADDR
The IP address of the DNS server
mode
Set the device’s IP addressing mode (DHCP, static or “keep AP’s setting”)
dhcp
Set the device’s IP address mode to DHCP
static
Set the device’s IP address mode to static
keep
Set the device to use its current network settings

Defaults

none

Example

ruckus(config-ap)# ip enable mode dhcp
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)#