Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS ZoneDirector 10.5.1 Command Line Interface Reference Guide 800-73081-001 Rev C

  • 1 CommScope Legal Statements
  • 2 Ruckus Back Cover
  • Preface Ruckus
    • 3 Contact Information, Resources, and Conventions
      • 3.1 Contacting RUCKUS Customer Services and Support
      • 3.2 Document Feedback
      • 3.3 RUCKUS Product Documentation Resources
      • 3.4 Online Training Resources
      • 3.5 Document Conventions
      • 3.6 Command Syntax Conventions
  • 4 About This Guide
    • 4.1 Introduction
    • 4.2 What's New in this Release
  • 5 Understanding the ZoneDirector Command Line Interface
    • 5.1 Introduction
    • 5.2 Accessing the Command Line Interface
      • 5.2.1 Requirements
      • 5.2.2 Step 1: Connecting the Administrative Computer to ZoneDirector
        • 5.2.2.1 Using an Ethernet Connection
        • 5.2.2.2 Using a Serial Connection
      • 5.2.3 Step 2: Start and Configure the SSH Client
        • 5.2.3.1 Using SSH
        • 5.2.3.2 Using a Serial Connection
      • 5.2.4 Step 3: Log Into the CLI
    • 5.3 ZoneDirector CLI Setup Wizard
    • 5.4 Using the ? Command
    • 5.5 Using the Help Command
    • 5.6 Top-Level Commands
      • 5.6.1 disable
      • 5.6.2 ping
      • 5.6.3 reboot
      • 5.6.4 shutdown
      • 5.6.5 set-factory
      • 5.6.6 data-privacy
        • 5.6.6.1 search
        • 5.6.6.2 delete
        • 5.6.6.3 ftpurl
      • 5.6.7 config
      • 5.6.8 logo
      • 5.6.9 debug
      • 5.6.10 reset radius-statistics
      • 5.6.11 monitor
  • 6 Viewing Current Configuration
    • 6.1 Show Commands Overview
    • 6.2 Show Location Services Commands
      • 6.2.1 show location-services all
      • 6.2.2 show location-services name
    • 6.3 Show AAA Commands
      • 6.3.1 show aaa all
      • 6.3.2 show aaa name
    • 6.4 Show DHCP Commands
      • 6.4.1 show dhcp all
      • 6.4.2 show dhcp name
    • 6.5 Show Access Point Commands
      • 6.5.1 show ap all
      • 6.5.2 show ap devname
      • 6.5.3 show ap mac
    • 6.6 Show AP Group Commands
      • 6.6.1 show ap-group all
      • 6.6.2 show ap-group name
    • 6.7 Show AP Policy Commands
      • 6.7.1 show ap-policy
    • 6.8 Show System Configuration Commands
      • 6.8.1 show config
    • 6.9 Show Performance Commands
      • 6.9.1 show performance
      • 6.9.2 show performance ap-radio2-4
      • 6.9.3 show performance ap-radio5
      • 6.9.4 show performance station
    • 6.10 Show System Information Commands
      • 6.10.1 show sysinfo
    • 6.11 Show Ethernet Info Commands
      • 6.11.1 show ethinfo
    • 6.12 Show Technical Support Commands
      • 6.12.1 show techsupport
    • 6.13 Show Management ACL Commands
      • 6.13.1 show mgmt-acl all
      • 6.13.2 show mgmt-acl name
      • 6.13.3 show mgmt-acl-ipv6 all
      • 6.13.4 show mgmt-acl-ipv6 name
    • 6.14 Show Static Route Commands
      • 6.14.1 show static-route all
      • 6.14.2 show static-route name
      • 6.14.3 show static-route-ipv6 all
      • 6.14.4 show static-route-ipv6 name
    • 6.15 Show WLAN Commands
      • 6.15.1 show wlan
    • 6.16 Show WLAN Group Commands
      • 6.16.1 show wlan-group all
      • 6.16.2 show wlan-group name
    • 6.17 Show L2 Access Control List Commands
      • 6.17.1 show l2acl all
      • 6.17.2 show l2acl name
    • 6.18 Show Whitelist Commands
      • 6.18.1 show whitelist all
      • 6.18.2 show whitelist name
    • 6.19 Show L3 Access Control List Commands
      • 6.19.1 show l3acl all
      • 6.19.2 show l3acl-ipv6 all
      • 6.19.3 show l3acl name
      • 6.19.4 show l3acl-ipv6 name
    • 6.20 Show Hotspot Commands
      • 6.20.1 show hotspot all
      • 6.20.2 show hotspot name
      • 6.20.3 show hs20op all
      • 6.20.4 show hs20op name
      • 6.20.5 show hs20sp all
      • 6.20.6 show hs20sp name
    • 6.21 Show Guest Policy Commands
      • 6.21.1 show guest-access-service
      • 6.21.2 show guest-access-generation
      • 6.21.3 show portal-auth-generation
    • 6.22 Show Hotspot 2.0 Operator Commands
      • 6.22.1 show hs20op
    • 6.23 Show Hotspot 2.0 Service Provider Commands
      • 6.23.1 show hs20sp
    • 6.24 Show Role Commands
      • 6.24.1 show role all
      • 6.24.2 show role name
    • 6.25 Show VLAN Pool Commands
      • 6.25.1 show vlan-pool
    • 6.26 Show User Commands
      • 6.26.1 show user all
      • 6.26.2 show user name
    • 6.27 Show Currently Active Clients Commands
      • 6.27.1 show current-active-clients all
      • 6.27.2 show current-active-clients mac
    • 6.28 Show Mesh Commands
      • 6.28.1 show mesh info
      • 6.28.2 show mesh topology
    • 6.29 Show Dynamic PSK Commands
      • 6.29.1 show dynamic-psks
    • 6.30 Show Guest Pass Commands
      • 6.30.1 show guest-passes
    • 6.31 show guest-access-generation
    • 6.32 show portal-auth-generation
    • 6.33 Show Rogue Device Commands
      • 6.33.1 show rogue-devices
    • 6.34 Show Events and Activities Commands
      • 6.34.1 show events-activities
    • 6.35 Show Alarm Commands
      • 6.35.1 show alarm
    • 6.36 Show License Commands
      • 6.36.1 show license
    • 6.37 Show USB Software Commands
      • 6.37.1 show usb-software
    • 6.38 Show Application Policy Commands
      • 6.38.1 show app-denial-policy
      • 6.38.2 show user-defined-app
      • 6.38.3 show app-port-mapping
    • 6.39 Show Session-Timeout Commands
      • 6.39.1 show session-timeout
    • 6.40 Show Active Wired Client Commands
      • 6.40.1 show active-wired-client all
      • 6.40.2 show active-wired-client mac
    • 6.41 Show RADIUS Statistics Commands
      • 6.41.1 show radius-statistics
      • 6.41.2 reset radius-statistics
    • 6.42 Show Load Balancing Commands
      • 6.42.1 show load-balance
    • 6.43 Monitor AP MAC Commands
      • 6.43.1 monitor ap mac
    • 6.44 Monitor Currently Active Client Commands
      • 6.44.1 monitor current-active-clients
      • 6.44.2 monitor current-active-clients-mcs-info
    • 6.45 Monitor Sysinfo Commands
      • 6.45.1 monitor sysinfo
  • 7 Configuring Controller Settings
    • 7.1 Configuration Commands Overview
    • 7.2 General Config Commands
      • 7.2.1 help
      • 7.2.2 history
      • 7.2.3 abort
      • 7.2.4 end
      • 7.2.5 exit
      • 7.2.6 quit
    • 7.3 Configure Context Show Commands
      • 7.3.1 show aaa
      • 7.3.2 show dhcp
      • 7.3.3 show admin
      • 7.3.4 show mgmt-acl
      • 7.3.5 show mgmt-acl-ipv6
      • 7.3.6 show static-route
      • 7.3.7 show static-route-ipv6
      • 7.3.8 show ap
      • 7.3.9 show l2acl
      • 7.3.10 show l3acl
      • 7.3.11 show whitelist
      • 7.3.12 show l3acl-ipv6
      • 7.3.13 show prece
      • 7.3.14 show dvcpcy
      • 7.3.15 show user-app-ip
      • 7.3.16 show user-app-port
      • 7.3.17 show url-filtering
      • 7.3.18 show load-balancing
      • 7.3.19 show wlan
      • 7.3.20 show wlan-group
      • 7.3.21 show role
      • 7.3.22 show vlan-pool
      • 7.3.23 show user
      • 7.3.24 show hotspot
      • 7.3.25 show guest-access-service
      • 7.3.26 show guest-access-generation
      • 7.3.27 show portal-auth-generation
      • 7.3.28 show ap-group
      • 7.3.29 show ap-policy
      • 7.3.30 show usb-software
      • 7.3.31 show location-services
      • 7.3.32 show hs20op
      • 7.3.33 show hs20sp
      • 7.3.34 show mdnsproxyrule
      • 7.3.35 show mdnsproxy
      • 7.3.36 show bonjour-policy
    • 7.4 Configure Location Services Commands
      • 7.4.1 location-services
      • 7.4.2 no location-services
    • 7.5 Configure AAA Server Commands
      • 7.5.1 aaa
    • 7.6 Configure DHCP Server Commands
      • 7.6.1 dhcp
      • 7.6.2 no dhcp
      • 7.6.3 show
      • 7.6.4 name
      • 7.6.5 description
      • 7.6.6 first
      • 7.6.7 second
      • 7.6.8 no second
    • 7.7 Configure Admin Commands
      • 7.7.1 admin
      • 7.7.2 name
      • 7.7.3 name password
      • 7.7.4 show
      • 7.7.5 Admin Authentication Commands
        • 7.7.5.1 auth-server
        • 7.7.5.2 no auth-server
        • 7.7.5.3 auth-server with-fallback
    • 7.8 Configure AD Domain Server Commands
      • 7.8.1 ad-domainsvr
      • 7.8.2 no ad-domainsvr
    • 7.9 Configure Access Points Commands
      • 7.9.1 ap
      • 7.9.2 no ap
      • 7.9.3 devname
      • 7.9.4 no devname
      • 7.9.5 bonjour-gateway
      • 7.9.6 no bonjour-gateway
      • 7.9.7 description
      • 7.9.8 no description
      • 7.9.9 gps
      • 7.9.10 no gps
      • 7.9.11 location
      • 7.9.12 no location
      • 7.9.13 group
      • 7.9.14 ip
      • 7.9.15 ipv6
      • 7.9.16 no ipv6
      • 7.9.17 usb-software
      • 7.9.18 no usb-software
      • 7.9.19 no usb-software-override
      • 7.9.20 status-leds
      • 7.9.21 no status-leds-override
      • 7.9.22 status-lacp
      • 7.9.23 no status-lacp-override
      • 7.9.24 usb-port
      • 7.9.25 no usb-port-override
      • 7.9.26 poe-out
      • 7.9.27 no poe-out-override
      • 7.9.28 external-antenna
      • 7.9.29 no external-antenna-override
      • 7.9.30 spectra-analysis 2.4GHz
      • 7.9.31 spectra-analysis 5GHz
      • 7.9.32 internal-heater
      • 7.9.33 no internal-heater-override
      • 7.9.34 cband-channels
      • 7.9.35 no cband-channels-override
      • 7.9.36 cband-license
      • 7.9.37 no cband-license-override
      • 7.9.38 ipmode
      • 7.9.39 no ipmode-override
      • 7.9.40 venue-name
      • 7.9.41 no venue-name
      • 7.9.42 lldp
      • 7.9.43 no lldp-override
      • 7.9.44 power-mode
      • 7.9.45 no power-mode-override
      • 7.9.46 802.3af-txchain
      • 7.9.47 no 802.3af-txchain-override
      • 7.9.48 Radio 2.4/5 GHz Commands
        • 7.9.48.1 radio
        • 7.9.48.2 no radio
        • 7.9.48.3 show
      • 7.9.49 Mesh Commands
        • 7.9.49.1 mesh mode
        • 7.9.49.2 mesh uplink-selection
        • 7.9.49.3 maxhops
      • 7.9.50 AP Port Setting Commands
        • 7.9.50.1 port-setting
        • 7.9.50.2 abort
        • 7.9.50.3 end
        • 7.9.50.4 exit
        • 7.9.50.5 quit
        • 7.9.50.6 show
        • 7.9.50.7 lan
        • 7.9.50.8 no lan
        • 7.9.50.9 lan uplink
        • 7.9.50.10 lan untag
        • 7.9.50.11 lan member
        • 7.9.50.12 lan opt82
        • 7.9.50.13 lan tunnel
        • 7.9.50.14 lan guest-vlan
        • 7.9.50.15 lan dvlan enabled
        • 7.9.50.16 lan dvlan disabled
        • 7.9.50.17 lan dot1x
        • 7.9.50.18 dot1x authsvr
        • 7.9.50.19 dot1x acctsvr
        • 7.9.50.20 dot1x mac-auth-bypass
        • 7.9.50.21 dot1x supplicant username
        • 7.9.50.22 dot1x supplicant password
        • 7.9.50.23 dot1x supplicant mac
    • 7.10 Configure AP Policy Commands
      • 7.10.1 ap-policy
      • 7.10.2 show
      • 7.10.3 ap-management-vlan
      • 7.10.4 no ap-management-vlan
      • 7.10.5 ap-auto-approve
      • 7.10.6 no ap-auto-approve
      • 7.10.7 limited-zd-discovery
      • 7.10.8 no limited-zd-discovery
      • 7.10.9 limited-zd-discovery prefer-primary-zd
      • 7.10.10 no limited-zd-discovery prefer-primary-zd
      • 7.10.11 limited-zd-discovery keep-ap-setting
      • 7.10.12 no limited-zd-discovery keep-ap-setting
      • 7.10.13 auto-recovery
      • 7.10.14 no auto-recovery
      • 7.10.15 vlan-qos
      • 7.10.16 no vlan-qos
      • 7.10.17 timeout
      • 7.10.18 no timeout
      • 7.10.19 import-aplist
      • 7.10.20 exit
      • 7.10.21 abort
      • 7.10.22 quit
    • 7.11 Configure AP Group Commands
      • 7.11.1 ap-group
      • 7.11.2 no ap-group
      • 7.11.3 exit
      • 7.11.4 abort
      • 7.11.5 quit
      • 7.11.6 show
      • 7.11.7 description
      • 7.11.8 no description
      • 7.11.9 Configure Location Based Service Commands
        • 7.11.9.1 location-services
        • 7.11.9.2 no location-services
        • 7.11.9.3 ipmode
        • 7.11.9.4 no ipmode-override
        • 7.11.9.5 channelflyoff
        • 7.11.9.6 no channelflyoff
        • 7.11.9.7 no channelflyoff-override
      • 7.11.10 Radio 2.4/5 GHz Commands
        • 7.11.10.1 radio
        • 7.11.10.2 radio 2.4 channel auto
        • 7.11.10.3 radio 2.4 channel number <NUMBER>
        • 7.11.10.4 radio 2.4 channelization auto
        • 7.11.10.5 radio 2.4 channelization number <NUMBER>
        • 7.11.10.6 radio 2.4 auto-channel-selection four-channel
        • 7.11.10.7 radio 2.4 auto-channel-selection three-channel
        • 7.11.10.8 radio 2.4 tx-power Auto
        • 7.11.10.9 radio 2.4 tx-power Full
        • 7.11.10.10 radio 2.4 tx-power 1/2
        • 7.11.10.11 radio 2.4 tx-power 1/4
        • 7.11.10.12 radio 2.4 tx-power 1/8
        • 7.11.10.13 radio 2.4 tx-power Min
        • 7.11.10.14 radio 2.4 tx-power Num
        • 7.11.10.15 radio 2.4 11n-only Auto
        • 7.11.10.17 radio 2.4 wlan-group <WORD>
        • 7.11.10.18 radio 2.4 admission-control <VALUE>
        • 7.11.10.19 radio 2.4 prot-mode
        • 7.11.10.20 radio 2.4 wlan-service [enable | disable]
        • 7.11.10.21 radio 2.4 channel-range <NUMBER-LIST>
        • 7.11.10.22 radio 5 indoor channel auto
        • 7.11.10.23 radio 5 indoor channel number <NUMBER>
        • 7.11.10.24 radio 5 indoor channel-range <NUMBER-LIST>
        • 7.11.10.25 radio 5 outdoor channel auto
        • 7.11.10.26 radio 5 outdoor channel number <NUMBER>
        • 7.11.10.27 radio 5 outdoor channel-range <NUMBER-LIST>
        • 7.11.10.28 radio 5 channel auto
        • 7.11.10.29 radio 5 channel number <NUMBER>
        • 7.11.10.30 radio 5 channelization auto
        • 7.11.10.31 radio 5 channelization number <NUMBER>
        • 7.11.10.32 radio 5 tx-power Auto
        • 7.11.10.33 radio 5 tx-power Full
        • 7.11.10.34 radio 5 tx-power 1/2
        • 7.11.10.35 radio 5 tx-power 1/4
        • 7.11.10.36 radio 5 tx-power 1/8
        • 7.11.10.37 radio 5 tx-power Min
        • 7.11.10.38 radio 5 tx-power Num
        • 7.11.10.41 radio 5 wlan-group <WORD>
        • 7.11.10.42 radio 5 admission-control <VALUE>
        • 7.11.10.43 radio 5 wlan-service [enable | disable]
        • 7.11.10.44 no radio 2.4 channelization-override
        • 7.11.10.45 no radio 2.4 channel-range-override
        • 7.11.10.46 no radio 2.4 channel-override
        • 7.11.10.47 no radio 2.4 tx-power-override
        • 7.11.10.49 no radio 2.4 wlan-group-override
        • 7.11.10.50 no radio 2.4 admission-control
        • 7.11.10.51 no radio 2.4 admission-control-override
        • 7.11.10.52 no radio 2.4 prot-mode-override
        • 7.11.10.53 no radio 2.4 wlan-service-override
        • 7.11.10.54 no radio 5 indoor channel-range-override
        • 7.11.10.55 no radio 5 indoor channel-override
        • 7.11.10.56 no radio 5 outdoor channel-range-override
        • 7.11.10.57 no radio 5 outdoor channel-override
        • 7.11.10.58 no radio 5 channelization-override
        • 7.11.10.59 no radio 5 tx-power-override
        • 7.11.10.61 no radio 5 wlan-group-override
        • 7.11.10.62 no radio 5 admission-control
        • 7.11.10.63 no radio 5 admission-control-override
        • 7.11.10.64 no radio 5 wlan-service-override
      • 7.11.11 QoS Commands (AP)
        • 7.11.11.1 qos
        • 7.11.11.2 qos mld-query
        • 7.11.11.3 qos mld-query v1
        • 7.11.11.4 qos mld-query v2
        • 7.11.11.5 qos igmp-query
        • 7.11.11.6 qos igmp-query v2
        • 7.11.11.7 qos igmp-query v3
        • 7.11.11.8 no qos mld-query v1
        • 7.11.11.9 no qos mld-query v2
        • 7.11.11.10 no qos igmp-query v2
        • 7.11.11.11 no qos igmp-query v3
      • 7.11.12 Model-Specific Commands
        • 7.11.12.1 no model-setting
        • 7.11.12.2 model
        • 7.11.12.3 port-setting
        • 7.11.12.4 Model-Specific Port Settings
          • 7.11.12.4.1 model port-setting
          • 7.11.12.4.2 abort
          • 7.11.12.4.3 end
          • 7.11.12.4.4 exit
          • 7.11.12.4.5 quit
          • 7.11.12.4.6 show
          • 7.11.12.4.7 no lan
          • 7.11.12.4.8 lan
          • 7.11.12.4.9 lan uplink
          • 7.11.12.4.10 lan untag
          • 7.11.12.4.11 lan member
          • 7.11.12.4.12 lan opt82
          • 7.11.12.4.13 dot1x
          • 7.11.12.4.14 dot1x authsvr
          • 7.11.12.4.15 dot1x acctsvr
          • 7.11.12.4.16 dot1x mac-auth-bypass
          • 7.11.12.4.17 dot1x supplicant username
          • 7.11.12.4.18 dot1x supplicant password
          • 7.11.12.4.19 dot1x supplicant mac
          • 7.11.12.4.20 no dot1x
          • 7.11.12.4.21 lan guest-vlan
          • 7.11.12.4.22 lan dvlan
          • 7.11.12.4.23 lan qos
          • 7.11.12.4.24 lan qos mld-snooping
          • 7.11.12.4.25 lan qos igmp-snooping
          • 7.11.12.4.26 lan qos directed-mcast
          • 7.11.12.4.27 no lan qos
          • 7.11.12.4.28 no lan qos mld-snooping
          • 7.11.12.4.29 no lan qos igmp-snooping
          • 7.11.12.4.30 no lan qos directed-mcast
          • 7.11.12.4.31 no dot1x
          • 7.11.12.4.32 no dot1x authsvr
          • 7.11.12.4.33 no dot1x acctsvr
          • 7.11.12.4.34 no dot1x mac-auth-bypass
        • 7.11.12.5 external-antenna
        • 7.11.12.6 power-mode
        • 7.11.12.7 no power-mode-override
        • 7.11.12.8 802.3af-txchain
        • 7.11.12.9 no 802.3af-txchain-override
      • 7.11.13 AP Group Membership
        • 7.11.13.1 member
        • 7.11.13.2 member add mac
        • 7.11.13.3 member mac move-to system-default
        • 7.11.13.4 member mac move-to name
      • 7.11.14 LLDP Commands
        • 7.11.14.1 lldp
        • 7.11.14.2 no lldp
        • 7.11.14.3 lldp keep-ap-setting
        • 7.11.14.4 no lldp keep-ap-setting
    • 7.12 Configure Certificate Commands
      • 7.12.1 quit
      • 7.12.2 restore
      • 7.12.3 re-generate-private-key
    • 7.13 Configure Hotspot Redirect Settings
      • 7.13.1 hotspot_redirect_https
      • 7.13.2 no hotspot_redirect_https
      • 7.13.3 no blocked-client
    • 7.14 Configure Layer 2 Access Control Commands
      • 7.14.1 acl
      • 7.14.2 no acl
      • 7.14.3 abort
      • 7.14.4 end
      • 7.14.5 exit
      • 7.14.6 quit
      • 7.14.7 show
      • 7.14.8 name
      • 7.14.9 description
      • 7.14.10 add-mac
      • 7.14.11 mode allow
      • 7.14.12 mode deny
      • 7.14.13 del-mac
    • 7.15 Configure Layer 3 Access Control Commands
      • 7.15.1 l3acl
      • 7.15.2 no l3acl
      • 7.15.3 l3acl-ipv6
      • 7.15.4 no l3acl-ipv6
      • 7.15.5 abort
      • 7.15.6 end
      • 7.15.7 exit
      • 7.15.8 quit
      • 7.15.9 show
      • 7.15.10 name
      • 7.15.11 description
      • 7.15.12 mode allow
      • 7.15.13 mode deny
      • 7.15.14 rule-order
        • 7.15.14.1 source address
        • 7.15.14.2 source port
      • 7.15.15 no rule-order
    • 7.16 Layer 3 Access Control Rule Commands
      • 7.16.1 end
      • 7.16.2 exit
      • 7.16.3 order
      • 7.16.4 description
      • 7.16.5 type allow
      • 7.16.6 type deny
      • 7.16.7 destination address
      • 7.16.8 destination port
      • 7.16.9 protocol
      • 7.16.10 show
    • 7.17 Layer 3 IPv6 Access Control List Commands
      • 7.17.1 l3acl-ipv6
      • 7.17.2 abort
      • 7.17.3 end
      • 7.17.4 exit
      • 7.17.5 quit
      • 7.17.6 name
      • 7.17.7 description
      • 7.17.8 mode allow
      • 7.17.9 mode deny
      • 7.17.10 no rule-order
      • 7.17.11 rule-order
    • 7.18 Configure L3 IPv6 Rule Commands
      • 7.18.1 end
      • 7.18.2 exit
      • 7.18.3 order
      • 7.18.4 description
      • 7.18.5 type allow
      • 7.18.6 type deny
      • 7.18.7 destination
      • 7.18.8 destination address
      • 7.18.9 destination port
      • 7.18.10 protocol
      • 7.18.11 icmpv6-type Any
      • 7.18.12 icmpv6-type number
      • 7.18.13 show
    • 7.19 Configure Precedence Policy Commands
      • 7.19.1 prece
      • 7.19.2 no prece
      • 7.19.3 end
      • 7.19.4 exit
      • 7.19.5 quit
      • 7.19.6 name
      • 7.19.7 description
      • 7.19.8 show
      • 7.19.9 Configure Precedence Policy Rule Commands
        • 7.19.9.1 rule
        • 7.19.9.2 description
        • 7.19.9.3 order
    • 7.20 Configure Device Policy Commands
      • 7.20.1 dvcpcy
      • 7.20.2 no dvcpcy
      • 7.20.3 rule
    • 7.21 Configure Application Policy Commands
      • 7.21.1 app-policy
      • 7.21.2 no app-policy
      • 7.21.3 description
      • 7.21.4 show
      • 7.21.5 Configure Application Policy Rules
        • 7.21.5.1 rule
        • 7.21.5.2 no rule
        • 7.21.5.3 rule-type
        • 7.21.5.4 application-type
        • 7.21.5.5 category
        • 7.21.5.6 application
    • 7.22 Configuring User-Defined Applications
      • 7.22.1 user-defined-app
      • 7.22.2 no user-app-ip
      • 7.22.3 abort
      • 7.22.4 end
      • 7.22.5 exit
      • 7.22.6 destination-IP
      • 7.22.7 netmask
      • 7.22.8 destination-port
      • 7.22.9 protocol
      • 7.22.10 application-name
    • 7.23 Configuring User-Defined Applications Based on Port Mapping
      • 7.23.1 user-app-port
      • 7.23.2 no user-app-port
      • 7.23.3 abort
      • 7.23.4 end
      • 7.23.5 exit
      • 7.23.6 port
      • 7.23.7 protocol
      • 7.23.8 application-name
    • 7.24 Configure URL Filtering Settings
      • 7.24.1 url-filtering
      • 7.24.2 no url-filtering
      • 7.24.3 description
      • 7.24.4 filtering-level
      • 7.24.5 blocked-category
      • 7.24.6 create-blacklist
      • 7.24.7 delete-blacklist
      • 7.24.8 create-whitelist
      • 7.24.9 delete-whitelist
      • 7.24.10 google-safe-search
      • 7.24.11 no google-safe-search
      • 7.24.12 google-ip
      • 7.24.13 youtube-safe-search
      • 7.24.14 no youtube-safe-search
      • 7.24.15 youtube-ip
      • 7.24.16 bing-safe-search
      • 7.24.17 no bing-safe-search
      • 7.24.18 bing-ip
      • 7.24.19 show
    • 7.25 Configure Whitelist Commands
      • 7.25.1 whitelist
      • 7.25.2 no whitelist
      • 7.25.3 name
      • 7.25.4 description
      • 7.25.5 Configuring Whitelist Rules
        • 7.25.5.1 rule
        • 7.25.5.2 no rule
        • 7.25.5.3 description
        • 7.25.5.4 mac
        • 7.25.5.5 ip
    • 7.26 Configure Band Balancing Commands
      • 7.26.1 band-balancing
      • 7.26.2 abort
      • 7.26.3 end
      • 7.26.4 exit
      • 7.26.5 quit
      • 7.26.6 enable
      • 7.26.7 disable
      • 7.26.8 Proactive
      • 7.26.9 percent-2.4G <NUMBER>
      • 7.26.10 show
    • 7.27 Configure Load Balancing Commands
      • 7.27.1 load-balancing
      • 7.27.2 adj-threshold
      • 7.27.3 weak-bypass
      • 7.27.4 strong-bypass
      • 7.27.5 act-threshold
      • 7.27.6 new-trigger
      • 7.27.7 headroom
      • 7.27.8 disable wifi0
      • 7.27.9 disable wifi1
      • 7.27.10 enable wifi0
      • 7.27.11 enable wifi1
      • 7.27.12 show
    • 7.28 Configure STP Commands
      • 7.28.1 stp
      • 7.28.2 no stp
    • 7.29 Configure System Commands
      • 7.29.1 system
      • 7.29.2 dot11-country-code
      • 7.29.3 hostname
      • 7.29.4 Interface Commands
        • 7.29.4.1 interface
        • 7.29.4.2 ip enable
        • 7.29.4.3 ip route gateway
        • 7.29.4.4 ip name-server
        • 7.29.4.5 ip addr
        • 7.29.4.6 ip mode
        • 7.29.4.7 show
        • 7.29.4.8 ipv6 enable
        • 7.29.4.9 ipv6 route gateway
        • 7.29.4.10 ipv6 name-server
        • 7.29.4.11 ipv6 addr
        • 7.29.4.12 ipv6 mode
        • 7.29.4.13 vlan
        • 7.29.4.14 no ip
        • 7.29.4.15 no ipv6
      • 7.29.5 NTP Commands
        • 7.29.5.1 ntp
        • 7.29.5.2 no ntp
      • 7.29.6 Timezone Commands
        • 7.29.6.1 system-timezone
          • 7.29.6.1.1 userdefined-timezone
          • 7.29.6.1.2 no userdefined-timezone
          • 7.29.6.1.3 system-dst
          • 7.29.6.1.4 no system-dst
          • 7.29.6.1.5 userdefined-dst
          • 7.29.6.1.6 no userdefined-dst
      • 7.29.7 FTP Commands
        • 7.29.7.1 ftp
        • 7.29.7.2 no ftp
        • 7.29.7.3 ftp-anon
        • 7.29.7.4 no ftp-anon
      • 7.29.8 Smart Redundancy Commands
        • 7.29.8.1 smart-redundancy
        • 7.29.8.2 no smart-redundancy
      • 7.29.9 Management Interface Commands
        • 7.29.9.1 mgmt-if
        • 7.29.9.2 no mgmt-if
        • 7.29.9.3 ip addr
        • 7.29.9.4 gateway
        • 7.29.9.5 no gateway
        • 7.29.9.6 vlan
        • 7.29.9.7 mgmt-if-ipv6
        • 7.29.9.8 no mgmt-if-ipv6
        • 7.29.9.9 ipv6 addr
        • 7.29.9.10 gateway
        • 7.29.9.11 no gateway
        • 7.29.9.12 vlan
        • 7.29.9.13 flexmaster
        • 7.29.9.14 no flexmaster
        • 7.29.9.15 northbound
        • 7.29.9.16 no northbound
      • 7.29.10 SNMPv2 Commands
        • 7.29.10.1 snmpv2
        • 7.29.10.2 contact
        • 7.29.10.3 location
        • 7.29.10.4 ro-community
        • 7.29.10.5 rw-community
        • 7.29.10.6 show
        • 7.29.10.7 snmpv2-ap
        • 7.29.10.8 no snmpv2-ap
      • 7.29.11 SNMPv3 Commands
        • 7.29.11.1 snmpv3
        • 7.29.11.2 snmp-trap-format
        • 7.29.11.3 snmpv2-trap
        • 7.29.11.4 snmpv3-trap
        • 7.29.11.5 no snmp-trap-ap
      • 7.29.12 Syslog Settings Commands
        • 7.29.12.1 syslog
        • 7.29.12.2 no syslog
        • 7.29.12.3 server
        • 7.29.12.4 type
        • 7.29.12.5 facility
        • 7.29.12.6 priority
        • 7.29.12.7 ap-facility
        • 7.29.12.8 ap-priority
        • 7.29.12.9 no syslog-ap
      • 7.29.13 Management Access Control List Commands
        • 7.29.13.1 mgmt-acl
        • 7.29.13.2 no mgmt-acl
        • 7.29.13.3 mgmt-acl-ipv6
        • 7.29.13.4 no mgmt-acl-ipv6
        • 7.29.13.5 exit
        • 7.29.13.6 end
        • 7.29.13.7 quit
        • 7.29.13.8 abort
        • 7.29.13.9 name
        • 7.29.13.10 restrict-type
          • 7.29.13.10.1 restrict-type single ip-addr
          • 7.29.13.10.2 restrict-type subnet ip-subnet
          • 7.29.13.10.3 restrict-type range ip-range
        • 7.29.13.11 show
      • 7.29.14 QoS Commands
        • 7.29.14.1 no qos
        • 7.29.14.2 qos
        • 7.29.14.3 heuristics video inter-packet-gap
        • 7.29.14.4 heuristics video packet-length
        • 7.29.14.5 heuristics voice inter-packet-gap
        • 7.29.14.6 heuristics voice packet-length
        • 7.29.14.7 heuristics classification video packet-octet-count
        • 7.29.14.8 heuristics classification voice packet-octet-count
        • 7.29.14.9 heuristics no-classification video packet-octet-count
        • 7.29.14.10 heuristics no-classification voice packet-octet-count
        • 7.29.14.11 tos classification video
        • 7.29.14.12 tos classification voice
        • 7.29.14.13 tos classification data
        • 7.29.14.14 tos classification background
        • 7.29.14.15 show
      • 7.29.15 tunnel-mtu
      • 7.29.16 lwapp-mgmt-qlen-threshold
      • 7.29.17 bonjour
      • 7.29.18 no bonjour
      • 7.29.19 telnetd
      • 7.29.20 no telnetd
      • 7.29.21 static-route
      • 7.29.22 no static-route
      • 7.29.23 static-route-ipv6
      • 7.29.24 no static-route-ipv6
      • 7.29.25 snmp-trap
      • 7.29.26 no snmp-trap
      • 7.29.27 no snmpv2-trap
      • 7.29.28 no snmpv3-trap
      • 7.29.29 no snmpv2
      • 7.29.30 no snmpv3
      • 7.29.31 login-warning
      • 7.29.32 no login-warning
      • 7.29.33 event-log-level
      • 7.29.34 support-entitle
      • 7.29.35 URL-Filtering-License-Renew
      • 7.29.36 session-stats-resv
      • 7.29.37 no session-stats-resv
      • 7.29.38 arc-data-transmission
      • 7.29.39 no arc-data-transmission
      • 7.29.40 session-limit-unauth-stats
      • 7.29.41 no session-limit-unauth-stats
      • 7.29.42 eapol-no-retry
      • 7.29.43 no eapol-no-retry
      • 7.29.44 shared-username-control-enable
      • 7.29.45 no shared-username-control-enable
      • 7.29.46 show
      • 7.29.47 show support-entitle
      • 7.29.48 show URL-Filtering-License
      • 7.29.49 show shared-username-control
    • 7.30 Configure UPNP Settings
      • 7.30.1 upnp
      • 7.30.2 no upnp
    • 7.31 Configure Zero-IT Settings
      • 7.31.1 zero-it
      • 7.31.2 zero-it-auth-server
    • 7.32 Configure Dynamic PSK Expiration
      • 7.32.1 dynamic-psk-expiration
    • 7.33 Configure WLAN Settings Commands
      • 7.33.1 wlan
      • 7.33.2 no wlan
      • 7.33.3 abort
      • 7.33.4 end
      • 7.33.5 exit
      • 7.33.6 quit
      • 7.33.7 description
      • 7.33.8 called-station-id-type
      • 7.33.9 ssid
      • 7.33.10 beacon-interval
      • 7.33.11 wlan-bind
      • 7.33.12 mgmt-tx-rate
      • 7.33.13 name
      • 7.33.14 type
        • 7.33.14.1 type standard-usage
        • 7.33.14.2 type guest-access
        • 7.33.14.3 type hotspot
        • 7.33.14.4 type hs20
        • 7.33.14.5 type autonomous
      • 7.33.15 open
        • 7.33.15.1 open owe
        • 7.33.15.2 open wpa2
        • 7.33.15.3 open wpa3
        • 7.33.15.4 open wpa23-mixed
        • 7.33.15.5 open wpa-mixed
        • 7.33.15.6 open wep-64
        • 7.33.15.7 open wep-128
      • 7.33.16 zero-it-activation
      • 7.33.17 no zero-it-activation
      • 7.33.18 mac none
      • 7.33.19 mac owe
      • 7.33.20 mac wpa2
      • 7.33.21 mac wpa3
      • 7.33.22 mac wpa23-mixed
      • 7.33.23 mac wpa-mixed
      • 7.33.24 mac wep-64
      • 7.33.25 mac wep-128
      • 7.33.26 auth-server
      • 7.33.27 shared wep-64
      • 7.33.28 shared wep-128
      • 7.33.29 dot1x eap-type EAP-SIM auth-server
      • 7.33.30 dot1x eap-type PEAP auth-server
      • 7.33.31 dot1x wpa2
      • 7.33.32 dot1x wpa2 algorithm auto auth-server
      • 7.33.33 dot1x wpa-mixed algorithm AES auth-server
      • 7.33.34 dot1x wpa-mixed algorithm auto auth-server
      • 7.33.35 dot1x authentication encryption wep-64 auth-server
      • 7.33.36 dot1x wep-128 auth-server
      • 7.33.37 dot1x none
      • 7.33.38 dot1x-mac
      • 7.33.39 dot1x wpa3
      • 7.33.40 bgscan
      • 7.33.41 no bgscan
      • 7.33.42 ft-roaming
      • 7.33.43 no ft-roaming
      • 7.33.44 rrm-neigh-report
      • 7.33.45 no rrm-neigh-report
      • 7.33.46 https-redirection
      • 7.33.47 no https-redirection
      • 7.33.48 client-flow-log
      • 7.33.49 no client-flow-log
      • 7.33.50 client-connect-log
      • 7.33.51 no client-connect-log
      • 7.33.52 bypasscna
      • 7.33.53 no bypasscna
      • 7.33.54 client-isolation
      • 7.33.55 whitelist
      • 7.33.56 no whitelist
      • 7.33.57 load-balancing
      • 7.33.58 no load-balancing
      • 7.33.59 band-balancing
      • 7.33.60 no band-balancing
      • 7.33.61 send-eap-failure
      • 7.33.62 no send-eap-failure
      • 7.33.63 pap-authenticator
      • 7.33.64 no pap-authenticator
      • 7.33.65 nasid-type
      • 7.33.66 priority low
      • 7.33.67 priority high
      • 7.33.68 web-auth
      • 7.33.69 no web-auth
      • 7.33.70 grace-period
      • 7.33.71 no grace-period
      • 7.33.72 acct-server
      • 7.33.73 acct-server interim-update
      • 7.33.74 no acct-server
      • 7.33.75 inactivity-timeout
      • 7.33.76 web-auth-timeout
      • 7.33.77 vlan
      • 7.33.78 dynamic-vlan
      • 7.33.79 no dynamic-vlan
      • 7.33.80 mcast-filter
      • 7.33.81 no mcast-filter
      • 7.33.82 hide-ssid
      • 7.33.83 no hide-ssid
      • 7.33.84 ofdm-only
      • 7.33.85 no ofdm-only
      • 7.33.86 admission-control
      • 7.33.87 no admission-control
      • 7.33.88 transient-client-management
      • 7.33.89 no transient-client-management
      • 7.33.90 join-wait-time
      • 7.33.91 join-wait-threshold
      • 7.33.92 join-expire-time
      • 7.33.93 min-client-rssi
      • 7.33.94 bss-minrate
      • 7.33.95 no bss-minrate
      • 7.33.96 dtim-period
      • 7.33.97 no dtim-period
      • 7.33.98 directed-threshold
      • 7.33.99 no directed-threshold
      • 7.33.100 tunnel-mode
      • 7.33.101 no tunnel-mode
      • 7.33.102 dhcp-relay
      • 7.33.103 no dhcp-relay
      • 7.33.104 smart-roam
      • 7.33.105 no smart-roam
      • 7.33.106 force-dhcp
      • 7.33.107 force-dhcp-timeout
      • 7.33.108 no force-dhcp
      • 7.33.109 Configuring DHCP Option 82 Sub-Option Settings
        • 7.33.109.1 option82
        • 7.33.109.2 no option82
      • 7.33.110 sta-info-extraction
      • 7.33.111 no sta-info-extraction
      • 7.33.112 max-clients
      • 7.33.113 802dot11d
      • 7.33.114 no 802dot11d
      • 7.33.115 arc
      • 7.33.116 no arc
      • 7.33.117 apply-arc-policy
      • 7.33.118 no apply-arc-policy
      • 7.33.119 url-filtering
      • 7.33.120 no url-filtering
      • 7.33.121 url-filtering-profile
      • 7.33.122 auto-proxy
      • 7.33.123 no auto-proxy
      • 7.33.124 pmk-cache
      • 7.33.125 no pmk-cache
      • 7.33.126 pmk-cache-for-reconnect
      • 7.33.127 no pmk-cache-for-reconnect
      • 7.33.128 sae-anti-clogging-threshold
      • 7.33.129 roaming-acct-interim-update
      • 7.33.130 no roaming-acct-interim-update
      • 7.33.131 wifi6
      • 7.33.132 no wifi6
      • 7.33.133 show
    • 7.34 Configure Dynamic PSK Commands
      • 7.34.1 dynamic-psk enable
      • 7.34.2 dynamic-psk external
      • 7.34.3 dynamic-psk passphrase-len
      • 7.34.4 dynamic-psk type
      • 7.34.5 no dynamic-psk
      • 7.34.6 limit-dpsk
      • 7.34.7 no limit-dpsk
      • 7.34.8 shared-dpsk
      • 7.34.9 no shared-dpsk
      • 7.34.10 dynamic-psk-expiration
      • 7.34.11 no l2acl
      • 7.34.12 no role-based-access-ctrl
      • 7.34.13 no l3acl
      • 7.34.14 no l3acl-ipv6
      • 7.34.15 no vlanpool
      • 7.34.16 no dvcpcy
      • 7.34.17 rate-limit
      • 7.34.18 no rate-limit
      • 7.34.19 vlanpool
      • 7.34.20 no mac-addr-format
      • 7.34.21 mac-addr-format
      • 7.34.22 acl dvcpcy
      • 7.34.23 acl prece
      • 7.34.24 acl role-based-access-ctrl
      • 7.34.25 qos classification
      • 7.34.26 no qos classification
      • 7.34.27 qos heuristics-udp
      • 7.34.28 no qos heuristics-udp
      • 7.34.29 qos directed-multicast
      • 7.34.30 no qos directed-multicast
      • 7.34.31 qos igmp-snooping
      • 7.34.32 no qos igmp-snooping
      • 7.34.33 qos mld-snooping
      • 7.34.34 no qos mld-snooping
      • 7.34.35 qos tos-classification
      • 7.34.36 no qos tos-classification
      • 7.34.37 qos priority high
      • 7.34.38 qos priority low
      • 7.34.39 qos directed-threshold
      • 7.34.40 disable-dgaf
      • 7.34.41 no disable-dgaf
      • 7.34.42 proxy-arp
      • 7.34.43 no proxy-arp
      • 7.34.44 80211w-pmf
      • 7.34.45 no 80211w-pmf
      • 7.34.46 ignor-unauth-stats
      • 7.34.47 no ignor-unauth-stats
      • 7.34.48 show
    • 7.35 Configure WLAN Group Commands
      • 7.35.1 wlan-group
      • 7.35.2 no wlan-group
      • 7.35.3 abort
      • 7.35.4 end
      • 7.35.5 exit
      • 7.35.6 quit
      • 7.35.7 name
      • 7.35.8 description
      • 7.35.9 wlan
      • 7.35.10 no wlan
      • 7.35.11 wlan vlan override none
      • 7.35.12 wlan vlan override tag
      • 7.35.13 show
    • 7.36 Configure Role Commands
      • 7.36.1 role
      • 7.36.2 no role
      • 7.36.3 abort
      • 7.36.4 end
      • 7.36.5 exit
      • 7.36.6 quit
      • 7.36.7 name
      • 7.36.8 description
      • 7.36.9 group-attributes
      • 7.36.10 wlan-allowed
      • 7.36.11 specify-wlan-access
      • 7.36.12 no specify-wlan-access
      • 7.36.13 guest-pass-generation
      • 7.36.14 no guest-pass-generation
      • 7.36.15 admin
      • 7.36.16 no admin
      • 7.36.17 access-ctrl
      • 7.36.18 no access-ctrl
      • 7.36.19 dvc-type-allowed
      • 7.36.20 specify-dvc-policy
      • 7.36.21 vlan
      • 7.36.22 rate-limit uplink
      • 7.36.23 rate-limit uplink downlink
      • 7.36.24 no rate-limit
      • 7.36.25 apply-arc-policy
      • 7.36.26 no apply-arc-policy
      • 7.36.27 url-filtering
      • 7.36.28 no url-filtering
      • 7.36.29 show
    • 7.37 Configure VLAN Pool Commands
      • 7.37.1 vlan-pool
      • 7.37.2 no vlan-pool
    • 7.38 Configure User Commands
      • 7.38.1 user
      • 7.38.2 no user
      • 7.38.3 abort
      • 7.38.4 end
      • 7.38.5 exit
      • 7.38.6 quit
      • 7.38.7 user-name
      • 7.38.8 full-name
      • 7.38.9 password
      • 7.38.10 role
      • 7.38.11 show
    • 7.39 Configure Guest Access Commands
      • 7.39.1 guest-access
      • 7.39.2 no guest-access
      • 7.39.3 abort
      • 7.39.4 end
      • 7.39.5 exit
      • 7.39.6 quit
      • 7.39.7 guest-access-force-https-redirection
      • 7.39.8 no guest-access-force-https-redirection
      • 7.39.9 guest-access-guestpass-effective
      • 7.39.10 name
      • 7.39.11 self-service
      • 7.39.12 no self-service
      • 7.39.13 guestpass-duration
      • 7.39.14 guestpass-reauth
      • 7.39.15 no guestpass-reauth
      • 7.39.16 guestpass-share-number
      • 7.39.17 guestpass-sponsor
      • 7.39.18 no guestpass-sponsor
      • 7.39.19 guestpass-sponsor-auth-server
      • 7.39.20 guestpass-sponsor-number
      • 7.39.21 guestpass-notification
      • 7.39.22 guestpass-terms-and-conditions
      • 7.39.23 no guestpass-terms-and-conditions
      • 7.39.24 onboarding
      • 7.39.25 no onboarding
      • 7.39.26 no authentication
      • 7.39.27 authentication guest-pass-and-social-login
      • 7.39.28 authentication only-social-login
      • 7.39.29 no term-of-use
      • 7.39.30 term-of-use
      • 7.39.31 redirect
      • 7.39.32 welcome-text
      • 7.39.33 walled-garden
      • 7.39.34 no walled-garden
      • 7.39.35 social-media-login
        • 7.39.35.1 social-media-login delete-social-media
        • 7.39.35.2 social-media-login google
          • 7.39.35.2.1 social-media-login hds
          • 7.39.35.2.2 social-media-login no hds
        • 7.39.35.3 social-media-login linkedin
        • 7.39.35.4 social-media-login microsoft
        • 7.39.35.5 social-media-login wechat
        • 7.39.35.6 social-media-login wechat force-follow
      • 7.39.36 show
    • 7.40 web-portal-force-https-redirection
    • 7.41 no web-portal-force-https-redirection
    • 7.42 portal-auth-force-dns-server
    • 7.43 no portal_auth-force-dns-server
    • 7.44 guest-access-auth-server
    • 7.45 Configuring Guest Access Restriction Rules
      • 7.45.1 no restrict-access-order
      • 7.45.2 restrict-access-order
      • 7.45.3 show
      • 7.45.4 order
      • 7.45.5 description
      • 7.45.6 type allow
      • 7.45.7 type deny
      • 7.45.8 destination address
      • 7.45.9 destination port
      • 7.45.10 protocol
    • 7.46 IPv6 Guest Restrict Access Commands
      • 7.46.1 no restrict-access-order-ipv6
      • 7.46.2 restrict-access-order-ipv6
      • 7.46.3 show
      • 7.46.4 order
      • 7.46.5 description
      • 7.46.6 type allow
      • 7.46.7 type deny
      • 7.46.8 destination address
      • 7.46.9 destination port
      • 7.46.10 protocol
      • 7.46.11 icmpv6-type
    • 7.47 Configure Hotspot Commands
      • 7.47.1 hotspot
      • 7.47.2 no hotspot
      • 7.47.3 abort
      • 7.47.4 end
      • 7.47.5 exit
      • 7.47.6 quit
      • 7.47.7 show
      • 7.47.8 name
      • 7.47.9 smartclient
      • 7.47.10 no smartclient
      • 7.47.11 login-page
      • 7.47.12 start-page
      • 7.47.13 no session-timeout
      • 7.47.14 session-timeout
      • 7.47.15 no grace-period
      • 7.47.16 grace-period
      • 7.47.17 auth-server local
      • 7.47.18 auth-server name
      • 7.47.19 auth-server name no-mac-bypass
      • 7.47.20 auth-server name mac-bypass
      • 7.47.21 auth-server name mac-bypass mac-addr-format
      • 7.47.22 acct-server
      • 7.47.23 no acct-server
      • 7.47.24 acct-server interim-update
      • 7.47.25 client-isolation
      • 7.47.26 whitelist
      • 7.47.27 location-id
      • 7.47.28 location-name
      • 7.47.29 walled-garden
      • 7.47.30 no walled-garden
    • 7.48 Configuring Hotspot Restricted Access Rules
      • 7.48.1 restrict-access-order
      • 7.48.2 no restrict-access-order
      • 7.48.3 restrict-access-order-ipv6
      • 7.48.4 no restrict-access-order-ipv6
      • 7.48.5 icmpv6-type
    • 7.49 Hotspot Access Restriction Commands
      • 7.49.1 end
      • 7.49.2 exit
      • 7.49.3 show
      • 7.49.4 order
      • 7.49.5 description
      • 7.49.6 type allow
      • 7.49.7 type deny
      • 7.49.8 destination address
      • 7.49.9 destination port
      • 7.49.10 protocol
      • 7.49.11 intrusion-prevention
      • 7.49.12 no intrusion-prevention
    • 7.50 Configure Hotspot 2.0 Commands
      • 7.50.1 hs20op
      • 7.50.2 no hs20op
      • 7.50.3 Configure Hotspot 2.0 Operator Settings
      • 7.50.4 hs20sp
      • 7.50.5 no hs20sp
      • 7.50.6 Configure Hotspot 2.0 Service Provider Settings
      • 7.50.7 nai-realm
      • 7.50.8 name
      • 7.50.9 encoding
      • 7.50.10 eap-method
      • 7.50.11 eap-method eap-mthd
      • 7.50.12 eap-method auth-info
    • 7.51 Configure Mesh Commands
      • 7.51.1 mesh
      • 7.51.2 abort
      • 7.51.3 end
      • 7.51.4 exit
      • 7.51.5 quit
      • 7.51.6 show
      • 7.51.7 ssid
      • 7.51.8 passphrase
      • 7.51.9 hops-warn-threshold
      • 7.51.10 no detect-hops
      • 7.51.11 fan-out-threshold
      • 7.51.12 no detect-fanout
      • 7.51.13 beacon-interval
      • 7.51.14 mgmt-tx-rate
      • 7.51.15 mesh-uplink-selection static
      • 7.51.16 mesh-uplink-selection dynamic
      • 7.51.17 mesh-radio-option
      • 7.51.18 zero-touch-mesh
      • 7.51.19 no zero-touch-mesh
      • 7.51.20 zt-mesh-serial
      • 7.51.21 no zt-mesh-serial
    • 7.52 Configure Alarm Commands
      • 7.52.1 alarm
      • 7.52.2 no alarm
      • 7.52.3 abort
      • 7.52.4 end
      • 7.52.5 exit
      • 7.52.6 quit
      • 7.52.7 e-mail
      • 7.52.8 show
    • 7.53 Configure Alarm-Event Settings
      • 7.53.1 alarm-event
      • 7.53.2 event
      • 7.53.3 no event
    • 7.54 Configure Services Commands
      • 7.54.1 abort
      • 7.54.2 end
      • 7.54.3 exit
      • 7.54.4 quit
      • 7.54.5 auto-channel-background-scanning
        • 7.54.5.1 radio-2.4
        • 7.54.5.2 no radio-2.4
        • 7.54.5.3 radio-5
        • 7.54.5.4 no radio-5
        • 7.54.5.5 off-period
        • 7.54.5.6 no off-period
        • 7.54.5.7 clients
        • 7.54.5.8 interval
        • 7.54.5.9 threshold
        • 7.54.5.10 simulate
        • 7.54.5.11 deploy
        • 7.54.5.12 show
      • 7.54.6 auto-adjust-ap-channel radio-2.4
        • 7.54.6.1 no auto-adjust-ap-power radio-2.4
      • 7.54.7 auto-adjust-ap-power radio-5
        • 7.54.7.1 no auto-adjust-ap-power radio-5
      • 7.54.8 auto-adjust-ap-channel radio-2.4
        • 7.54.8.1 no auto-adjust-ap-channel radio-2.4
      • 7.54.9 auto-adjust-ap-channel radio-5
        • 7.54.9.1 no auto-adjust-ap-channel radio-5
      • 7.54.10 raps
      • 7.54.11 no raps
      • 7.54.12 channelfly
      • 7.54.13 no channelfly
      • 7.54.14 background-scan
      • 7.54.15 background-scan low-threshold
      • 7.54.16 no background-scan
      • 7.54.17 aeroscout-detection
      • 7.54.18 no aeroscout-detection
      • 7.54.19 ekahau
      • 7.54.20 no ekahau
      • 7.54.21 tun-encrypt
      • 7.54.22 no tun-encrypt
      • 7.54.23 tun-block-mcast all
      • 7.54.24 tun-block-mcast non-well-known
      • 7.54.25 no tun-block-mcast
      • 7.54.26 tun-block-bcast
      • 7.54.27 no tun-block-bcast
      • 7.54.28 tun-proxy-arp
      • 7.54.29 no tun-proxy-arp
      • 7.54.30 tun-ip-ageing
      • 7.54.31 pif
      • 7.54.32 no pif
      • 7.54.33 show
    • 7.55 Configure WIPS Commands
      • 7.55.1 wips
    • 7.56 Configure Email Server Commands
      • 7.56.1 email-server
      • 7.56.2 from
      • 7.56.3 enable
      • 7.56.4 no enable
      • 7.56.5 smtp-server-name
      • 7.56.6 smtp-server-port
      • 7.56.7 smtp-auth-name
      • 7.56.8 smtp-auth-password
      • 7.56.9 smtp-wait-time
      • 7.56.10 tls-smtp-encryption
      • 7.56.11 no tls-smtp-encryption
    • 7.57 Configure SMS Server Commands
      • 7.57.1 sms-server
      • 7.57.2 no sms-server
      • 7.57.3 country-code
    • 7.58 Configure mDNS (Bonjour) Commands
      • 7.58.1 mdnsproxy
      • 7.58.2 no mdnsproxy
      • 7.58.3 mdnsproxyrule
      • 7.58.4 no mdnsproxyrule
    • 7.59 Configure Bonjour Policy
      • 7.59.1 bonjour-policy
      • 7.59.2 no bonjour-policy
      • 7.59.3 Configure mDNS Proxy Rules
    • 7.60 Configure Bonjour Fencing Policy
      • 7.60.1 show
      • 7.60.2 description
      • 7.60.3 fencerule
      • 7.60.4 source-type
      • 7.60.5 device-mac
      • 7.60.6 anchor-ap
      • 7.60.7 service
      • 7.60.8 fencing-range
  • 8 Using Debug Commands
    • 8.1 Debug Commands Overview
    • 8.2 General Debug Commands
      • 8.2.1 help
      • 8.2.2 list-all
      • 8.2.3 history
      • 8.2.4 quit
      • 8.2.5 fw_upgrade
      • 8.2.6 restore
      • 8.2.7 restore all
      • 8.2.8 restore failover
      • 8.2.9 restore policy
      • 8.2.10 delete-station
      • 8.2.11 restart-ap
      • 8.2.12 save_debug_info
      • 8.2.13 save-config
      • 8.2.14 emfd-malloc-stats
      • 8.2.15 speedflex
        • 8.2.15.1 no speedflex
    • 8.3 Show Commands
      • 8.3.1 show ap
      • 8.3.2 show station
      • 8.3.3 show logs
      • 8.3.4 show tls
      • 8.3.5 show speedflex
      • 8.3.6 show remote-troubleshooting
      • 8.3.7 ps
      • 8.3.8 show configuration_change_log
    • 8.4 Accessing a Remote AP CLI
      • 8.4.1 remote_ap_cli
    • 8.5 Working with Debug Logs and Log Settings
      • 8.5.1 logs all
      • 8.5.2 no logs all
      • 8.5.3 logs comp sys-mgmt
      • 8.5.4 no logs comp sys-mgmt
      • 8.5.5 logs comp mesh
      • 8.5.6 no logs comp mesh
      • 8.5.7 logs comp web-auth
      • 8.5.8 no logs comp web-auth
      • 8.5.9 logs comp rf-mgmt
      • 8.5.10 no logs comp rf-mgmt
      • 8.5.11 logs comp radius
      • 8.5.12 no logs comp radius
      • 8.5.13 logs comp hotspot-srv
      • 8.5.14 no logs comp hotspot-srv
      • 8.5.15 logs comp aps
      • 8.5.16 no logs comp aps
      • 8.5.17 logs comp net-mgmt
      • 8.5.18 no logs comp net-mgmt
      • 8.5.19 logs comp 802.1x
      • 8.5.20 no logs comp 802.1x
      • 8.5.21 logs comp web-svr
      • 8.5.22 no logs comp web-svr
      • 8.5.23 logs comp 802.11
      • 8.5.24 no logs comp 802.11
      • 8.5.25 logs comp dvlan
      • 8.5.26 no logs comp dvlan
      • 8.5.27 logs comp smart-redundancy
      • 8.5.28 no logs comp smart-redundancy
      • 8.5.29 logs comp bonjour-gateway
      • 8.5.30 no logs comp bonjour-gateway
      • 8.5.31 logs comp mdnsd
      • 8.5.32 no logs comp mdnsd
      • 8.5.33 logs comp client-association
      • 8.5.34 no logs comp client-association
      • 8.5.35 logs mac
      • 8.5.36 no logs mac
      • 8.5.37 logs play
      • 8.5.38 no logs play
      • 8.5.39 logs winbind
      • 8.5.40 support-tls
      • 8.5.41 no support-tls
      • 8.5.42 configuration_change_log
      • 8.5.43 no configuration_change_log
    • 8.6 Remote Troubleshooting
      • 8.6.1 remote-troubleshooting server
      • 8.6.2 remote-troubleshooting start
      • 8.6.3 remote-troubleshooting stop
      • 8.6.4 radius-stats-wlan
      • 8.6.5 radius-stats-authsvr
    • 8.7 AP Core Dump Collection
      • 8.7.1 collect_ap_coredump
      • 8.7.2 no collect_ap_coredump
    • 8.8 Script Execution
      • 8.8.1 script
      • 8.8.2 quit
      • 8.8.3 list
      • 8.8.4 del
      • 8.8.5 info
      • 8.8.6 exec

no logs comp mesh

Disables debug logs of mesh components.

Parent topic: Working with Debug Logs and Log Settings

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback