show hs20op all
To display information about all Hotspot 2.0 Operators, use the following command:
Syntax Description
Defaults
None.
Example
ruckus# show hs20op all
Hotspot 2.0 Operator:
ID:
1:
NAME= operator1
Description=
Venue Group= Unspecified
Venue Type= Unspecified
ASRA Option:
Status= Disabled
Internet Option= Disabled
Access Network Type= Private
IPv4 Address Type= Not Available
IPv6 Address Type= Not Available
HESSID=
Friendly Name List:
Service Provider Profiles:
ID= 1
Name= provider1
WAN Metrics:
Enable Symmetric Link= Disabled
WAN at Capability= Disabled
Link Status= Link Up
WAN Downlink Load= 0
WAN Downlink Speed= 0
WAN Uplink Load= 0
WAN Uplink Speed= 0
Load Measurement Duration= 0
Connection Capability:
Description= ICMP
IP Protocol= 1
Port Number= 0
Status= Closed
Description= FTP
IP Protocol= 6
Port Number= 20
Status= Closed
Description= SSH
IP Protocol= 6
Port Number= 22
Status= Closed
Description= HTTP
IP Protocol= 6
Port Number= 80
Status= Closed
Description= Used by TLS VPNs
IP Protocol= 6
Port Number= 443
Status= Closed
Description= Used by PPTP VPNs
IP Protocol= 6
Port Number= 1723
Status= Closed
Description= VoIP
IP Protocol= 6
Port Number= 5060
Status= Closed
Description= Used by IKEv2 (IPSec VPN)
IP Protocol= 17
Port Number= 500
Status= Closed
Description= VoIP
IP Protocol= 17
Port Number= 5060
Status= Closed
Description= May be used by IKEv2 (IPSec VPN)
IP Protocol= 17
Port Number= 4500
Status= Closed
Description= ESP, used by IPSec VPNs
IP Protocol= 50
Port Number= 0
Status= Closed
Additional Connection Capability:
Advanced GAS Settings:
GAS query response buffering time= 1000
GAS DOS detection= Disabled
GAS DOS maximum request number= 200
Hotspot 2.0 Capability:
Operatiing Class Indication= Unspecified
ruckus#