radio

Use the radio command from within the config-ap context to configure the 2.4GHz or 5GHz radios independently.

radio [ 2.4 | 5 ] arguments

Syntax Description

2.4
Configure the 2.4 GHz radio
5
Configure the 5 GHz radio
channelization [ auto | NUMBER ]
Set channel width to 20 MHz, 40 MHz or Auto
channel [ auto | NUMBER ]
Set channel to Auto or manually set channel
tx-power [ auto | full | min | num 1-10 ]
Set transmit power to auto, full, min, or a number (-1dB~-10dB)
admission-control VALUE
Set the radio to use the specified call admission control airtime usage limit (%)
channel-range NUMBER-LIST
Set the allowed list of channels for the specified radio
wlan-group WORD
Set the AP radio as a member of a WLAN group
wlan-service [ enable | disable ]
Enable WLAN service on this radio
wlan-service-override
Enable the override of the WLAN service settings for this radio
extant-gain NUMBER
Set external antenna gain (on APs that support external antennas) (dBi)

Defaults

channelization: Auto

channel: Auto

wlan-group: Default

wlan-service: Enabled

wlan-service-override: Disabled

tx-power: Auto

admission-control: Disabled

spectralink-compatibility: Disabled

Example

ruckus(config-ap)# radio 2.4 channelization auto
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 channel auto
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 wlan-group Default
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 wlan-service
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 tx-power auto
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# end
The device information has been updated.
Your changes have been saved.
ruckus(config)#