auth-server with-fallback

To enable fallback authentication (for use when the remote server is unavailable), use the following command:

auth-server WORD with-fallback

Syntax Description

auth-server
Admin authentication with an external server
WORD
Set the auth-server to this server
with-fallback
Enable fallback authentication if the remote authentication server is unavailable

Defaults

None.

Example

ruckus(config-admin)# auth-server radius with-fallback
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-admin)# show
Administrator Name/Password:
Name= admin
Password= admin
Authenticate:
Mode= Authenticate with authentication server 'radius'
Fallback= Enabled
ruckus(config-admin)#