dot1x

To enable 802.1X on ports of all APs of a specific model in an AP group, use the following command:

model WORD dot1x

lan NUMBER dot1x [ disable | supplicant | auth-port-based | auth-mac-based | guest-vlan NUMBER | dvlan ]

Syntax Description

lan dot1x
Configure 802.1X settings for this port
NUMBER
LAN port number to configure
disable
Disable 802.1X
supplicant
Configure this LAN port as an 802.1X supplicant
auth-port-based
Configure this LAN port as an 802.1X authenticator (port-based)
auth-mac-based
Configure this LAN port as an 802.1X authenticator (MAC-based)

Defaults

Disabled

Example

ruckus(config-apgrp)# model zf7025 port-setting
ruckus(config-apgrp-port)# lan 1 dot1x supplicant
ruckus(config-apgrp-port)# show
PORTS:
LAN ID:
1:
Enable LAN = Yes
LAN Type= access
Untag ID= 1
Members= 1
802.1X= supp
DHCP opt82= Disabled