smart-redundancy

To enter the config-sys-smart-redundancy context and configure Smart Redundancy settings, use the following command:

smart-redundancy

Syntax Description

smart-redundancy
Configures smart redundancy settings.
abort
Exits the smart redundancy context without saving changes.
end
Saves changes, and then exits the smart redundancy context.
exit
Saves changes, and then exits the smart redundancy context.
quit
Exits the smart redundancy context without saving changes
peer-addr IP-ADDR
Sets the peer's IP/IPv6 address.
secret WORD
Sets the shared secret to the specified secret.
show
Displays information about smart redundancy.

Example

ruckus# config
ruckus(config)# system
ruckus(config-sys)# smart-redundancy
ruckus(config-sys-smart-redundancy)# peer-addr 192.168.40.101
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-sys-smart-redundancy)# secret secret
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-sys-smart-redundancy)# show
Smart Redundancy:
  Status= Disabled
  Peer IP/IPv6 Address=
  Shared Secret=

ruckus(config-sys-smart-redundancy)# end
The smart redundancy settings have been updated.
Your changes have been saved.
ruckus(config-sys)#