Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS ZoneDirector 10.5.1 Command Line Interface Reference Guide 800-73081-001 Rev C

  • 1 CommScope Legal Statements
  • 2 Ruckus Back Cover
  • Preface Ruckus
    • 3 Contact Information, Resources, and Conventions
      • 3.1 Contacting RUCKUS Customer Services and Support
      • 3.2 Document Feedback
      • 3.3 RUCKUS Product Documentation Resources
      • 3.4 Online Training Resources
      • 3.5 Document Conventions
      • 3.6 Command Syntax Conventions
  • 4 About This Guide
    • 4.1 Introduction
    • 4.2 What's New in this Release
  • 5 Understanding the ZoneDirector Command Line Interface
    • 5.1 Introduction
    • 5.2 Accessing the Command Line Interface
      • 5.2.1 Requirements
      • 5.2.2 Step 1: Connecting the Administrative Computer to ZoneDirector
        • 5.2.2.1 Using an Ethernet Connection
        • 5.2.2.2 Using a Serial Connection
      • 5.2.3 Step 2: Start and Configure the SSH Client
        • 5.2.3.1 Using SSH
        • 5.2.3.2 Using a Serial Connection
      • 5.2.4 Step 3: Log Into the CLI
    • 5.3 ZoneDirector CLI Setup Wizard
    • 5.4 Using the ? Command
    • 5.5 Using the Help Command
    • 5.6 Top-Level Commands
      • 5.6.1 disable
      • 5.6.2 ping
      • 5.6.3 reboot
      • 5.6.4 shutdown
      • 5.6.5 set-factory
      • 5.6.6 data-privacy
        • 5.6.6.1 search
        • 5.6.6.2 delete
        • 5.6.6.3 ftpurl
      • 5.6.7 config
      • 5.6.8 logo
      • 5.6.9 debug
      • 5.6.10 reset radius-statistics
      • 5.6.11 monitor
  • 6 Viewing Current Configuration
    • 6.1 Show Commands Overview
    • 6.2 Show Location Services Commands
      • 6.2.1 show location-services all
      • 6.2.2 show location-services name
    • 6.3 Show AAA Commands
      • 6.3.1 show aaa all
      • 6.3.2 show aaa name
    • 6.4 Show DHCP Commands
      • 6.4.1 show dhcp all
      • 6.4.2 show dhcp name
    • 6.5 Show Access Point Commands
      • 6.5.1 show ap all
      • 6.5.2 show ap devname
      • 6.5.3 show ap mac
    • 6.6 Show AP Group Commands
      • 6.6.1 show ap-group all
      • 6.6.2 show ap-group name
    • 6.7 Show AP Policy Commands
      • 6.7.1 show ap-policy
    • 6.8 Show System Configuration Commands
      • 6.8.1 show config
    • 6.9 Show Performance Commands
      • 6.9.1 show performance
      • 6.9.2 show performance ap-radio2-4
      • 6.9.3 show performance ap-radio5
      • 6.9.4 show performance station
    • 6.10 Show System Information Commands
      • 6.10.1 show sysinfo
    • 6.11 Show Ethernet Info Commands
      • 6.11.1 show ethinfo
    • 6.12 Show Technical Support Commands
      • 6.12.1 show techsupport
    • 6.13 Show Management ACL Commands
      • 6.13.1 show mgmt-acl all
      • 6.13.2 show mgmt-acl name
      • 6.13.3 show mgmt-acl-ipv6 all
      • 6.13.4 show mgmt-acl-ipv6 name
    • 6.14 Show Static Route Commands
      • 6.14.1 show static-route all
      • 6.14.2 show static-route name
      • 6.14.3 show static-route-ipv6 all
      • 6.14.4 show static-route-ipv6 name
    • 6.15 Show WLAN Commands
      • 6.15.1 show wlan
    • 6.16 Show WLAN Group Commands
      • 6.16.1 show wlan-group all
      • 6.16.2 show wlan-group name
    • 6.17 Show L2 Access Control List Commands
      • 6.17.1 show l2acl all
      • 6.17.2 show l2acl name
    • 6.18 Show Whitelist Commands
      • 6.18.1 show whitelist all
      • 6.18.2 show whitelist name
    • 6.19 Show L3 Access Control List Commands
      • 6.19.1 show l3acl all
      • 6.19.2 show l3acl-ipv6 all
      • 6.19.3 show l3acl name
      • 6.19.4 show l3acl-ipv6 name
    • 6.20 Show Hotspot Commands
      • 6.20.1 show hotspot all
      • 6.20.2 show hotspot name
      • 6.20.3 show hs20op all
      • 6.20.4 show hs20op name
      • 6.20.5 show hs20sp all
      • 6.20.6 show hs20sp name
    • 6.21 Show Guest Policy Commands
      • 6.21.1 show guest-access-service
      • 6.21.2 show guest-access-generation
      • 6.21.3 show portal-auth-generation
    • 6.22 Show Hotspot 2.0 Operator Commands
      • 6.22.1 show hs20op
    • 6.23 Show Hotspot 2.0 Service Provider Commands
      • 6.23.1 show hs20sp
    • 6.24 Show Role Commands
      • 6.24.1 show role all
      • 6.24.2 show role name
    • 6.25 Show VLAN Pool Commands
      • 6.25.1 show vlan-pool
    • 6.26 Show User Commands
      • 6.26.1 show user all
      • 6.26.2 show user name
    • 6.27 Show Currently Active Clients Commands
      • 6.27.1 show current-active-clients all
      • 6.27.2 show current-active-clients mac
    • 6.28 Show Mesh Commands
      • 6.28.1 show mesh info
      • 6.28.2 show mesh topology
    • 6.29 Show Dynamic PSK Commands
      • 6.29.1 show dynamic-psks
    • 6.30 Show Guest Pass Commands
      • 6.30.1 show guest-passes
    • 6.31 show guest-access-generation
    • 6.32 show portal-auth-generation
    • 6.33 Show Rogue Device Commands
      • 6.33.1 show rogue-devices
    • 6.34 Show Events and Activities Commands
      • 6.34.1 show events-activities
    • 6.35 Show Alarm Commands
      • 6.35.1 show alarm
    • 6.36 Show License Commands
      • 6.36.1 show license
    • 6.37 Show USB Software Commands
      • 6.37.1 show usb-software
    • 6.38 Show Application Policy Commands
      • 6.38.1 show app-denial-policy
      • 6.38.2 show user-defined-app
      • 6.38.3 show app-port-mapping
    • 6.39 Show Session-Timeout Commands
      • 6.39.1 show session-timeout
    • 6.40 Show Active Wired Client Commands
      • 6.40.1 show active-wired-client all
      • 6.40.2 show active-wired-client mac
    • 6.41 Show RADIUS Statistics Commands
      • 6.41.1 show radius-statistics
      • 6.41.2 reset radius-statistics
    • 6.42 Show Load Balancing Commands
      • 6.42.1 show load-balance
    • 6.43 Monitor AP MAC Commands
      • 6.43.1 monitor ap mac
    • 6.44 Monitor Currently Active Client Commands
      • 6.44.1 monitor current-active-clients
      • 6.44.2 monitor current-active-clients-mcs-info
    • 6.45 Monitor Sysinfo Commands
      • 6.45.1 monitor sysinfo
  • 7 Configuring Controller Settings
    • 7.1 Configuration Commands Overview
    • 7.2 General Config Commands
      • 7.2.1 help
      • 7.2.2 history
      • 7.2.3 abort
      • 7.2.4 end
      • 7.2.5 exit
      • 7.2.6 quit
    • 7.3 Configure Context Show Commands
      • 7.3.1 show aaa
      • 7.3.2 show dhcp
      • 7.3.3 show admin
      • 7.3.4 show mgmt-acl
      • 7.3.5 show mgmt-acl-ipv6
      • 7.3.6 show static-route
      • 7.3.7 show static-route-ipv6
      • 7.3.8 show ap
      • 7.3.9 show l2acl
      • 7.3.10 show l3acl
      • 7.3.11 show whitelist
      • 7.3.12 show l3acl-ipv6
      • 7.3.13 show prece
      • 7.3.14 show dvcpcy
      • 7.3.15 show user-app-ip
      • 7.3.16 show user-app-port
      • 7.3.17 show url-filtering
      • 7.3.18 show load-balancing
      • 7.3.19 show wlan
      • 7.3.20 show wlan-group
      • 7.3.21 show role
      • 7.3.22 show vlan-pool
      • 7.3.23 show user
      • 7.3.24 show hotspot
      • 7.3.25 show guest-access-service
      • 7.3.26 show guest-access-generation
      • 7.3.27 show portal-auth-generation
      • 7.3.28 show ap-group
      • 7.3.29 show ap-policy
      • 7.3.30 show usb-software
      • 7.3.31 show location-services
      • 7.3.32 show hs20op
      • 7.3.33 show hs20sp
      • 7.3.34 show mdnsproxyrule
      • 7.3.35 show mdnsproxy
      • 7.3.36 show bonjour-policy
    • 7.4 Configure Location Services Commands
      • 7.4.1 location-services
      • 7.4.2 no location-services
    • 7.5 Configure AAA Server Commands
      • 7.5.1 aaa
    • 7.6 Configure DHCP Server Commands
      • 7.6.1 dhcp
      • 7.6.2 no dhcp
      • 7.6.3 show
      • 7.6.4 name
      • 7.6.5 description
      • 7.6.6 first
      • 7.6.7 second
      • 7.6.8 no second
    • 7.7 Configure Admin Commands
      • 7.7.1 admin
      • 7.7.2 name
      • 7.7.3 name password
      • 7.7.4 show
      • 7.7.5 Admin Authentication Commands
        • 7.7.5.1 auth-server
        • 7.7.5.2 no auth-server
        • 7.7.5.3 auth-server with-fallback
    • 7.8 Configure AD Domain Server Commands
      • 7.8.1 ad-domainsvr
      • 7.8.2 no ad-domainsvr
    • 7.9 Configure Access Points Commands
      • 7.9.1 ap
      • 7.9.2 no ap
      • 7.9.3 devname
      • 7.9.4 no devname
      • 7.9.5 bonjour-gateway
      • 7.9.6 no bonjour-gateway
      • 7.9.7 description
      • 7.9.8 no description
      • 7.9.9 gps
      • 7.9.10 no gps
      • 7.9.11 location
      • 7.9.12 no location
      • 7.9.13 group
      • 7.9.14 ip
      • 7.9.15 ipv6
      • 7.9.16 no ipv6
      • 7.9.17 usb-software
      • 7.9.18 no usb-software
      • 7.9.19 no usb-software-override
      • 7.9.20 status-leds
      • 7.9.21 no status-leds-override
      • 7.9.22 status-lacp
      • 7.9.23 no status-lacp-override
      • 7.9.24 usb-port
      • 7.9.25 no usb-port-override
      • 7.9.26 poe-out
      • 7.9.27 no poe-out-override
      • 7.9.28 external-antenna
      • 7.9.29 no external-antenna-override
      • 7.9.30 spectra-analysis 2.4GHz
      • 7.9.31 spectra-analysis 5GHz
      • 7.9.32 internal-heater
      • 7.9.33 no internal-heater-override
      • 7.9.34 cband-channels
      • 7.9.35 no cband-channels-override
      • 7.9.36 cband-license
      • 7.9.37 no cband-license-override
      • 7.9.38 ipmode
      • 7.9.39 no ipmode-override
      • 7.9.40 venue-name
      • 7.9.41 no venue-name
      • 7.9.42 lldp
      • 7.9.43 no lldp-override
      • 7.9.44 power-mode
      • 7.9.45 no power-mode-override
      • 7.9.46 802.3af-txchain
      • 7.9.47 no 802.3af-txchain-override
      • 7.9.48 Radio 2.4/5 GHz Commands
        • 7.9.48.1 radio
        • 7.9.48.2 no radio
        • 7.9.48.3 show
      • 7.9.49 Mesh Commands
        • 7.9.49.1 mesh mode
        • 7.9.49.2 mesh uplink-selection
        • 7.9.49.3 maxhops
      • 7.9.50 AP Port Setting Commands
        • 7.9.50.1 port-setting
        • 7.9.50.2 abort
        • 7.9.50.3 end
        • 7.9.50.4 exit
        • 7.9.50.5 quit
        • 7.9.50.6 show
        • 7.9.50.7 lan
        • 7.9.50.8 no lan
        • 7.9.50.9 lan uplink
        • 7.9.50.10 lan untag
        • 7.9.50.11 lan member
        • 7.9.50.12 lan opt82
        • 7.9.50.13 lan tunnel
        • 7.9.50.14 lan guest-vlan
        • 7.9.50.15 lan dvlan enabled
        • 7.9.50.16 lan dvlan disabled
        • 7.9.50.17 lan dot1x
        • 7.9.50.18 dot1x authsvr
        • 7.9.50.19 dot1x acctsvr
        • 7.9.50.20 dot1x mac-auth-bypass
        • 7.9.50.21 dot1x supplicant username
        • 7.9.50.22 dot1x supplicant password
        • 7.9.50.23 dot1x supplicant mac
    • 7.10 Configure AP Policy Commands
      • 7.10.1 ap-policy
      • 7.10.2 show
      • 7.10.3 ap-management-vlan
      • 7.10.4 no ap-management-vlan
      • 7.10.5 ap-auto-approve
      • 7.10.6 no ap-auto-approve
      • 7.10.7 limited-zd-discovery
      • 7.10.8 no limited-zd-discovery
      • 7.10.9 limited-zd-discovery prefer-primary-zd
      • 7.10.10 no limited-zd-discovery prefer-primary-zd
      • 7.10.11 limited-zd-discovery keep-ap-setting
      • 7.10.12 no limited-zd-discovery keep-ap-setting
      • 7.10.13 auto-recovery
      • 7.10.14 no auto-recovery
      • 7.10.15 vlan-qos
      • 7.10.16 no vlan-qos
      • 7.10.17 timeout
      • 7.10.18 no timeout
      • 7.10.19 import-aplist
      • 7.10.20 exit
      • 7.10.21 abort
      • 7.10.22 quit
    • 7.11 Configure AP Group Commands
      • 7.11.1 ap-group
      • 7.11.2 no ap-group
      • 7.11.3 exit
      • 7.11.4 abort
      • 7.11.5 quit
      • 7.11.6 show
      • 7.11.7 description
      • 7.11.8 no description
      • 7.11.9 Configure Location Based Service Commands
        • 7.11.9.1 location-services
        • 7.11.9.2 no location-services
        • 7.11.9.3 ipmode
        • 7.11.9.4 no ipmode-override
        • 7.11.9.5 channelflyoff
        • 7.11.9.6 no channelflyoff
        • 7.11.9.7 no channelflyoff-override
      • 7.11.10 Radio 2.4/5 GHz Commands
        • 7.11.10.1 radio
        • 7.11.10.2 radio 2.4 channel auto
        • 7.11.10.3 radio 2.4 channel number <NUMBER>
        • 7.11.10.4 radio 2.4 channelization auto
        • 7.11.10.5 radio 2.4 channelization number <NUMBER>
        • 7.11.10.6 radio 2.4 auto-channel-selection four-channel
        • 7.11.10.7 radio 2.4 auto-channel-selection three-channel
        • 7.11.10.8 radio 2.4 tx-power Auto
        • 7.11.10.9 radio 2.4 tx-power Full
        • 7.11.10.10 radio 2.4 tx-power 1/2
        • 7.11.10.11 radio 2.4 tx-power 1/4
        • 7.11.10.12 radio 2.4 tx-power 1/8
        • 7.11.10.13 radio 2.4 tx-power Min
        • 7.11.10.14 radio 2.4 tx-power Num
        • 7.11.10.15 radio 2.4 11n-only Auto
        • 7.11.10.17 radio 2.4 wlan-group <WORD>
        • 7.11.10.18 radio 2.4 admission-control <VALUE>
        • 7.11.10.19 radio 2.4 prot-mode
        • 7.11.10.20 radio 2.4 wlan-service [enable | disable]
        • 7.11.10.21 radio 2.4 channel-range <NUMBER-LIST>
        • 7.11.10.22 radio 5 indoor channel auto
        • 7.11.10.23 radio 5 indoor channel number <NUMBER>
        • 7.11.10.24 radio 5 indoor channel-range <NUMBER-LIST>
        • 7.11.10.25 radio 5 outdoor channel auto
        • 7.11.10.26 radio 5 outdoor channel number <NUMBER>
        • 7.11.10.27 radio 5 outdoor channel-range <NUMBER-LIST>
        • 7.11.10.28 radio 5 channel auto
        • 7.11.10.29 radio 5 channel number <NUMBER>
        • 7.11.10.30 radio 5 channelization auto
        • 7.11.10.31 radio 5 channelization number <NUMBER>
        • 7.11.10.32 radio 5 tx-power Auto
        • 7.11.10.33 radio 5 tx-power Full
        • 7.11.10.34 radio 5 tx-power 1/2
        • 7.11.10.35 radio 5 tx-power 1/4
        • 7.11.10.36 radio 5 tx-power 1/8
        • 7.11.10.37 radio 5 tx-power Min
        • 7.11.10.38 radio 5 tx-power Num
        • 7.11.10.41 radio 5 wlan-group <WORD>
        • 7.11.10.42 radio 5 admission-control <VALUE>
        • 7.11.10.43 radio 5 wlan-service [enable | disable]
        • 7.11.10.44 no radio 2.4 channelization-override
        • 7.11.10.45 no radio 2.4 channel-range-override
        • 7.11.10.46 no radio 2.4 channel-override
        • 7.11.10.47 no radio 2.4 tx-power-override
        • 7.11.10.49 no radio 2.4 wlan-group-override
        • 7.11.10.50 no radio 2.4 admission-control
        • 7.11.10.51 no radio 2.4 admission-control-override
        • 7.11.10.52 no radio 2.4 prot-mode-override
        • 7.11.10.53 no radio 2.4 wlan-service-override
        • 7.11.10.54 no radio 5 indoor channel-range-override
        • 7.11.10.55 no radio 5 indoor channel-override
        • 7.11.10.56 no radio 5 outdoor channel-range-override
        • 7.11.10.57 no radio 5 outdoor channel-override
        • 7.11.10.58 no radio 5 channelization-override
        • 7.11.10.59 no radio 5 tx-power-override
        • 7.11.10.61 no radio 5 wlan-group-override
        • 7.11.10.62 no radio 5 admission-control
        • 7.11.10.63 no radio 5 admission-control-override
        • 7.11.10.64 no radio 5 wlan-service-override
      • 7.11.11 QoS Commands (AP)
        • 7.11.11.1 qos
        • 7.11.11.2 qos mld-query
        • 7.11.11.3 qos mld-query v1
        • 7.11.11.4 qos mld-query v2
        • 7.11.11.5 qos igmp-query
        • 7.11.11.6 qos igmp-query v2
        • 7.11.11.7 qos igmp-query v3
        • 7.11.11.8 no qos mld-query v1
        • 7.11.11.9 no qos mld-query v2
        • 7.11.11.10 no qos igmp-query v2
        • 7.11.11.11 no qos igmp-query v3
      • 7.11.12 Model-Specific Commands
        • 7.11.12.1 no model-setting
        • 7.11.12.2 model
        • 7.11.12.3 port-setting
        • 7.11.12.4 Model-Specific Port Settings
          • 7.11.12.4.1 model port-setting
          • 7.11.12.4.2 abort
          • 7.11.12.4.3 end
          • 7.11.12.4.4 exit
          • 7.11.12.4.5 quit
          • 7.11.12.4.6 show
          • 7.11.12.4.7 no lan
          • 7.11.12.4.8 lan
          • 7.11.12.4.9 lan uplink
          • 7.11.12.4.10 lan untag
          • 7.11.12.4.11 lan member
          • 7.11.12.4.12 lan opt82
          • 7.11.12.4.13 dot1x
          • 7.11.12.4.14 dot1x authsvr
          • 7.11.12.4.15 dot1x acctsvr
          • 7.11.12.4.16 dot1x mac-auth-bypass
          • 7.11.12.4.17 dot1x supplicant username
          • 7.11.12.4.18 dot1x supplicant password
          • 7.11.12.4.19 dot1x supplicant mac
          • 7.11.12.4.20 no dot1x
          • 7.11.12.4.21 lan guest-vlan
          • 7.11.12.4.22 lan dvlan
          • 7.11.12.4.23 lan qos
          • 7.11.12.4.24 lan qos mld-snooping
          • 7.11.12.4.25 lan qos igmp-snooping
          • 7.11.12.4.26 lan qos directed-mcast
          • 7.11.12.4.27 no lan qos
          • 7.11.12.4.28 no lan qos mld-snooping
          • 7.11.12.4.29 no lan qos igmp-snooping
          • 7.11.12.4.30 no lan qos directed-mcast
          • 7.11.12.4.31 no dot1x
          • 7.11.12.4.32 no dot1x authsvr
          • 7.11.12.4.33 no dot1x acctsvr
          • 7.11.12.4.34 no dot1x mac-auth-bypass
        • 7.11.12.5 external-antenna
        • 7.11.12.6 power-mode
        • 7.11.12.7 no power-mode-override
        • 7.11.12.8 802.3af-txchain
        • 7.11.12.9 no 802.3af-txchain-override
      • 7.11.13 AP Group Membership
        • 7.11.13.1 member
        • 7.11.13.2 member add mac
        • 7.11.13.3 member mac move-to system-default
        • 7.11.13.4 member mac move-to name
      • 7.11.14 LLDP Commands
        • 7.11.14.1 lldp
        • 7.11.14.2 no lldp
        • 7.11.14.3 lldp keep-ap-setting
        • 7.11.14.4 no lldp keep-ap-setting
    • 7.12 Configure Certificate Commands
      • 7.12.1 quit
      • 7.12.2 restore
      • 7.12.3 re-generate-private-key
    • 7.13 Configure Hotspot Redirect Settings
      • 7.13.1 hotspot_redirect_https
      • 7.13.2 no hotspot_redirect_https
      • 7.13.3 no blocked-client
    • 7.14 Configure Layer 2 Access Control Commands
      • 7.14.1 acl
      • 7.14.2 no acl
      • 7.14.3 abort
      • 7.14.4 end
      • 7.14.5 exit
      • 7.14.6 quit
      • 7.14.7 show
      • 7.14.8 name
      • 7.14.9 description
      • 7.14.10 add-mac
      • 7.14.11 mode allow
      • 7.14.12 mode deny
      • 7.14.13 del-mac
    • 7.15 Configure Layer 3 Access Control Commands
      • 7.15.1 l3acl
      • 7.15.2 no l3acl
      • 7.15.3 l3acl-ipv6
      • 7.15.4 no l3acl-ipv6
      • 7.15.5 abort
      • 7.15.6 end
      • 7.15.7 exit
      • 7.15.8 quit
      • 7.15.9 show
      • 7.15.10 name
      • 7.15.11 description
      • 7.15.12 mode allow
      • 7.15.13 mode deny
      • 7.15.14 rule-order
        • 7.15.14.1 source address
        • 7.15.14.2 source port
      • 7.15.15 no rule-order
    • 7.16 Layer 3 Access Control Rule Commands
      • 7.16.1 end
      • 7.16.2 exit
      • 7.16.3 order
      • 7.16.4 description
      • 7.16.5 type allow
      • 7.16.6 type deny
      • 7.16.7 destination address
      • 7.16.8 destination port
      • 7.16.9 protocol
      • 7.16.10 show
    • 7.17 Layer 3 IPv6 Access Control List Commands
      • 7.17.1 l3acl-ipv6
      • 7.17.2 abort
      • 7.17.3 end
      • 7.17.4 exit
      • 7.17.5 quit
      • 7.17.6 name
      • 7.17.7 description
      • 7.17.8 mode allow
      • 7.17.9 mode deny
      • 7.17.10 no rule-order
      • 7.17.11 rule-order
    • 7.18 Configure L3 IPv6 Rule Commands
      • 7.18.1 end
      • 7.18.2 exit
      • 7.18.3 order
      • 7.18.4 description
      • 7.18.5 type allow
      • 7.18.6 type deny
      • 7.18.7 destination
      • 7.18.8 destination address
      • 7.18.9 destination port
      • 7.18.10 protocol
      • 7.18.11 icmpv6-type Any
      • 7.18.12 icmpv6-type number
      • 7.18.13 show
    • 7.19 Configure Precedence Policy Commands
      • 7.19.1 prece
      • 7.19.2 no prece
      • 7.19.3 end
      • 7.19.4 exit
      • 7.19.5 quit
      • 7.19.6 name
      • 7.19.7 description
      • 7.19.8 show
      • 7.19.9 Configure Precedence Policy Rule Commands
        • 7.19.9.1 rule
        • 7.19.9.2 description
        • 7.19.9.3 order
    • 7.20 Configure Device Policy Commands
      • 7.20.1 dvcpcy
      • 7.20.2 no dvcpcy
      • 7.20.3 rule
    • 7.21 Configure Application Policy Commands
      • 7.21.1 app-policy
      • 7.21.2 no app-policy
      • 7.21.3 description
      • 7.21.4 show
      • 7.21.5 Configure Application Policy Rules
        • 7.21.5.1 rule
        • 7.21.5.2 no rule
        • 7.21.5.3 rule-type
        • 7.21.5.4 application-type
        • 7.21.5.5 category
        • 7.21.5.6 application
    • 7.22 Configuring User-Defined Applications
      • 7.22.1 user-defined-app
      • 7.22.2 no user-app-ip
      • 7.22.3 abort
      • 7.22.4 end
      • 7.22.5 exit
      • 7.22.6 destination-IP
      • 7.22.7 netmask
      • 7.22.8 destination-port
      • 7.22.9 protocol
      • 7.22.10 application-name
    • 7.23 Configuring User-Defined Applications Based on Port Mapping
      • 7.23.1 user-app-port
      • 7.23.2 no user-app-port
      • 7.23.3 abort
      • 7.23.4 end
      • 7.23.5 exit
      • 7.23.6 port
      • 7.23.7 protocol
      • 7.23.8 application-name
    • 7.24 Configure URL Filtering Settings
      • 7.24.1 url-filtering
      • 7.24.2 no url-filtering
      • 7.24.3 description
      • 7.24.4 filtering-level
      • 7.24.5 blocked-category
      • 7.24.6 create-blacklist
      • 7.24.7 delete-blacklist
      • 7.24.8 create-whitelist
      • 7.24.9 delete-whitelist
      • 7.24.10 google-safe-search
      • 7.24.11 no google-safe-search
      • 7.24.12 google-ip
      • 7.24.13 youtube-safe-search
      • 7.24.14 no youtube-safe-search
      • 7.24.15 youtube-ip
      • 7.24.16 bing-safe-search
      • 7.24.17 no bing-safe-search
      • 7.24.18 bing-ip
      • 7.24.19 show
    • 7.25 Configure Whitelist Commands
      • 7.25.1 whitelist
      • 7.25.2 no whitelist
      • 7.25.3 name
      • 7.25.4 description
      • 7.25.5 Configuring Whitelist Rules
        • 7.25.5.1 rule
        • 7.25.5.2 no rule
        • 7.25.5.3 description
        • 7.25.5.4 mac
        • 7.25.5.5 ip
    • 7.26 Configure Band Balancing Commands
      • 7.26.1 band-balancing
      • 7.26.2 abort
      • 7.26.3 end
      • 7.26.4 exit
      • 7.26.5 quit
      • 7.26.6 enable
      • 7.26.7 disable
      • 7.26.8 Proactive
      • 7.26.9 percent-2.4G <NUMBER>
      • 7.26.10 show
    • 7.27 Configure Load Balancing Commands
      • 7.27.1 load-balancing
      • 7.27.2 adj-threshold
      • 7.27.3 weak-bypass
      • 7.27.4 strong-bypass
      • 7.27.5 act-threshold
      • 7.27.6 new-trigger
      • 7.27.7 headroom
      • 7.27.8 disable wifi0
      • 7.27.9 disable wifi1
      • 7.27.10 enable wifi0
      • 7.27.11 enable wifi1
      • 7.27.12 show
    • 7.28 Configure STP Commands
      • 7.28.1 stp
      • 7.28.2 no stp
    • 7.29 Configure System Commands
      • 7.29.1 system
      • 7.29.2 dot11-country-code
      • 7.29.3 hostname
      • 7.29.4 Interface Commands
        • 7.29.4.1 interface
        • 7.29.4.2 ip enable
        • 7.29.4.3 ip route gateway
        • 7.29.4.4 ip name-server
        • 7.29.4.5 ip addr
        • 7.29.4.6 ip mode
        • 7.29.4.7 show
        • 7.29.4.8 ipv6 enable
        • 7.29.4.9 ipv6 route gateway
        • 7.29.4.10 ipv6 name-server
        • 7.29.4.11 ipv6 addr
        • 7.29.4.12 ipv6 mode
        • 7.29.4.13 vlan
        • 7.29.4.14 no ip
        • 7.29.4.15 no ipv6
      • 7.29.5 NTP Commands
        • 7.29.5.1 ntp
        • 7.29.5.2 no ntp
      • 7.29.6 Timezone Commands
        • 7.29.6.1 system-timezone
          • 7.29.6.1.1 userdefined-timezone
          • 7.29.6.1.2 no userdefined-timezone
          • 7.29.6.1.3 system-dst
          • 7.29.6.1.4 no system-dst
          • 7.29.6.1.5 userdefined-dst
          • 7.29.6.1.6 no userdefined-dst
      • 7.29.7 FTP Commands
        • 7.29.7.1 ftp
        • 7.29.7.2 no ftp
        • 7.29.7.3 ftp-anon
        • 7.29.7.4 no ftp-anon
      • 7.29.8 Smart Redundancy Commands
        • 7.29.8.1 smart-redundancy
        • 7.29.8.2 no smart-redundancy
      • 7.29.9 Management Interface Commands
        • 7.29.9.1 mgmt-if
        • 7.29.9.2 no mgmt-if
        • 7.29.9.3 ip addr
        • 7.29.9.4 gateway
        • 7.29.9.5 no gateway
        • 7.29.9.6 vlan
        • 7.29.9.7 mgmt-if-ipv6
        • 7.29.9.8 no mgmt-if-ipv6
        • 7.29.9.9 ipv6 addr
        • 7.29.9.10 gateway
        • 7.29.9.11 no gateway
        • 7.29.9.12 vlan
        • 7.29.9.13 flexmaster
        • 7.29.9.14 no flexmaster
        • 7.29.9.15 northbound
        • 7.29.9.16 no northbound
      • 7.29.10 SNMPv2 Commands
        • 7.29.10.1 snmpv2
        • 7.29.10.2 contact
        • 7.29.10.3 location
        • 7.29.10.4 ro-community
        • 7.29.10.5 rw-community
        • 7.29.10.6 show
        • 7.29.10.7 snmpv2-ap
        • 7.29.10.8 no snmpv2-ap
      • 7.29.11 SNMPv3 Commands
        • 7.29.11.1 snmpv3
        • 7.29.11.2 snmp-trap-format
        • 7.29.11.3 snmpv2-trap
        • 7.29.11.4 snmpv3-trap
        • 7.29.11.5 no snmp-trap-ap
      • 7.29.12 Syslog Settings Commands
        • 7.29.12.1 syslog
        • 7.29.12.2 no syslog
        • 7.29.12.3 server
        • 7.29.12.4 type
        • 7.29.12.5 facility
        • 7.29.12.6 priority
        • 7.29.12.7 ap-facility
        • 7.29.12.8 ap-priority
        • 7.29.12.9 no syslog-ap
      • 7.29.13 Management Access Control List Commands
        • 7.29.13.1 mgmt-acl
        • 7.29.13.2 no mgmt-acl
        • 7.29.13.3 mgmt-acl-ipv6
        • 7.29.13.4 no mgmt-acl-ipv6
        • 7.29.13.5 exit
        • 7.29.13.6 end
        • 7.29.13.7 quit
        • 7.29.13.8 abort
        • 7.29.13.9 name
        • 7.29.13.10 restrict-type
          • 7.29.13.10.1 restrict-type single ip-addr
          • 7.29.13.10.2 restrict-type subnet ip-subnet
          • 7.29.13.10.3 restrict-type range ip-range
        • 7.29.13.11 show
      • 7.29.14 QoS Commands
        • 7.29.14.1 no qos
        • 7.29.14.2 qos
        • 7.29.14.3 heuristics video inter-packet-gap
        • 7.29.14.4 heuristics video packet-length
        • 7.29.14.5 heuristics voice inter-packet-gap
        • 7.29.14.6 heuristics voice packet-length
        • 7.29.14.7 heuristics classification video packet-octet-count
        • 7.29.14.8 heuristics classification voice packet-octet-count
        • 7.29.14.9 heuristics no-classification video packet-octet-count
        • 7.29.14.10 heuristics no-classification voice packet-octet-count
        • 7.29.14.11 tos classification video
        • 7.29.14.12 tos classification voice
        • 7.29.14.13 tos classification data
        • 7.29.14.14 tos classification background
        • 7.29.14.15 show
      • 7.29.15 tunnel-mtu
      • 7.29.16 lwapp-mgmt-qlen-threshold
      • 7.29.17 bonjour
      • 7.29.18 no bonjour
      • 7.29.19 telnetd
      • 7.29.20 no telnetd
      • 7.29.21 static-route
      • 7.29.22 no static-route
      • 7.29.23 static-route-ipv6
      • 7.29.24 no static-route-ipv6
      • 7.29.25 snmp-trap
      • 7.29.26 no snmp-trap
      • 7.29.27 no snmpv2-trap
      • 7.29.28 no snmpv3-trap
      • 7.29.29 no snmpv2
      • 7.29.30 no snmpv3
      • 7.29.31 login-warning
      • 7.29.32 no login-warning
      • 7.29.33 event-log-level
      • 7.29.34 support-entitle
      • 7.29.35 URL-Filtering-License-Renew
      • 7.29.36 session-stats-resv
      • 7.29.37 no session-stats-resv
      • 7.29.38 arc-data-transmission
      • 7.29.39 no arc-data-transmission
      • 7.29.40 session-limit-unauth-stats
      • 7.29.41 no session-limit-unauth-stats
      • 7.29.42 eapol-no-retry
      • 7.29.43 no eapol-no-retry
      • 7.29.44 shared-username-control-enable
      • 7.29.45 no shared-username-control-enable
      • 7.29.46 show
      • 7.29.47 show support-entitle
      • 7.29.48 show URL-Filtering-License
      • 7.29.49 show shared-username-control
    • 7.30 Configure UPNP Settings
      • 7.30.1 upnp
      • 7.30.2 no upnp
    • 7.31 Configure Zero-IT Settings
      • 7.31.1 zero-it
      • 7.31.2 zero-it-auth-server
    • 7.32 Configure Dynamic PSK Expiration
      • 7.32.1 dynamic-psk-expiration
    • 7.33 Configure WLAN Settings Commands
      • 7.33.1 wlan
      • 7.33.2 no wlan
      • 7.33.3 abort
      • 7.33.4 end
      • 7.33.5 exit
      • 7.33.6 quit
      • 7.33.7 description
      • 7.33.8 called-station-id-type
      • 7.33.9 ssid
      • 7.33.10 beacon-interval
      • 7.33.11 wlan-bind
      • 7.33.12 mgmt-tx-rate
      • 7.33.13 name
      • 7.33.14 type
        • 7.33.14.1 type standard-usage
        • 7.33.14.2 type guest-access
        • 7.33.14.3 type hotspot
        • 7.33.14.4 type hs20
        • 7.33.14.5 type autonomous
      • 7.33.15 open
        • 7.33.15.1 open owe
        • 7.33.15.2 open wpa2
        • 7.33.15.3 open wpa3
        • 7.33.15.4 open wpa23-mixed
        • 7.33.15.5 open wpa-mixed
        • 7.33.15.6 open wep-64
        • 7.33.15.7 open wep-128
      • 7.33.16 zero-it-activation
      • 7.33.17 no zero-it-activation
      • 7.33.18 mac none
      • 7.33.19 mac owe
      • 7.33.20 mac wpa2
      • 7.33.21 mac wpa3
      • 7.33.22 mac wpa23-mixed
      • 7.33.23 mac wpa-mixed
      • 7.33.24 mac wep-64
      • 7.33.25 mac wep-128
      • 7.33.26 auth-server
      • 7.33.27 shared wep-64
      • 7.33.28 shared wep-128
      • 7.33.29 dot1x eap-type EAP-SIM auth-server
      • 7.33.30 dot1x eap-type PEAP auth-server
      • 7.33.31 dot1x wpa2
      • 7.33.32 dot1x wpa2 algorithm auto auth-server
      • 7.33.33 dot1x wpa-mixed algorithm AES auth-server
      • 7.33.34 dot1x wpa-mixed algorithm auto auth-server
      • 7.33.35 dot1x authentication encryption wep-64 auth-server
      • 7.33.36 dot1x wep-128 auth-server
      • 7.33.37 dot1x none
      • 7.33.38 dot1x-mac
      • 7.33.39 dot1x wpa3
      • 7.33.40 bgscan
      • 7.33.41 no bgscan
      • 7.33.42 ft-roaming
      • 7.33.43 no ft-roaming
      • 7.33.44 rrm-neigh-report
      • 7.33.45 no rrm-neigh-report
      • 7.33.46 https-redirection
      • 7.33.47 no https-redirection
      • 7.33.48 client-flow-log
      • 7.33.49 no client-flow-log
      • 7.33.50 client-connect-log
      • 7.33.51 no client-connect-log
      • 7.33.52 bypasscna
      • 7.33.53 no bypasscna
      • 7.33.54 client-isolation
      • 7.33.55 whitelist
      • 7.33.56 no whitelist
      • 7.33.57 load-balancing
      • 7.33.58 no load-balancing
      • 7.33.59 band-balancing
      • 7.33.60 no band-balancing
      • 7.33.61 send-eap-failure
      • 7.33.62 no send-eap-failure
      • 7.33.63 pap-authenticator
      • 7.33.64 no pap-authenticator
      • 7.33.65 nasid-type
      • 7.33.66 priority low
      • 7.33.67 priority high
      • 7.33.68 web-auth
      • 7.33.69 no web-auth
      • 7.33.70 grace-period
      • 7.33.71 no grace-period
      • 7.33.72 acct-server
      • 7.33.73 acct-server interim-update
      • 7.33.74 no acct-server
      • 7.33.75 inactivity-timeout
      • 7.33.76 web-auth-timeout
      • 7.33.77 vlan
      • 7.33.78 dynamic-vlan
      • 7.33.79 no dynamic-vlan
      • 7.33.80 mcast-filter
      • 7.33.81 no mcast-filter
      • 7.33.82 hide-ssid
      • 7.33.83 no hide-ssid
      • 7.33.84 ofdm-only
      • 7.33.85 no ofdm-only
      • 7.33.86 admission-control
      • 7.33.87 no admission-control
      • 7.33.88 transient-client-management
      • 7.33.89 no transient-client-management
      • 7.33.90 join-wait-time
      • 7.33.91 join-wait-threshold
      • 7.33.92 join-expire-time
      • 7.33.93 min-client-rssi
      • 7.33.94 bss-minrate
      • 7.33.95 no bss-minrate
      • 7.33.96 dtim-period
      • 7.33.97 no dtim-period
      • 7.33.98 directed-threshold
      • 7.33.99 no directed-threshold
      • 7.33.100 tunnel-mode
      • 7.33.101 no tunnel-mode
      • 7.33.102 dhcp-relay
      • 7.33.103 no dhcp-relay
      • 7.33.104 smart-roam
      • 7.33.105 no smart-roam
      • 7.33.106 force-dhcp
      • 7.33.107 force-dhcp-timeout
      • 7.33.108 no force-dhcp
      • 7.33.109 Configuring DHCP Option 82 Sub-Option Settings
        • 7.33.109.1 option82
        • 7.33.109.2 no option82
      • 7.33.110 sta-info-extraction
      • 7.33.111 no sta-info-extraction
      • 7.33.112 max-clients
      • 7.33.113 802dot11d
      • 7.33.114 no 802dot11d
      • 7.33.115 arc
      • 7.33.116 no arc
      • 7.33.117 apply-arc-policy
      • 7.33.118 no apply-arc-policy
      • 7.33.119 url-filtering
      • 7.33.120 no url-filtering
      • 7.33.121 url-filtering-profile
      • 7.33.122 auto-proxy
      • 7.33.123 no auto-proxy
      • 7.33.124 pmk-cache
      • 7.33.125 no pmk-cache
      • 7.33.126 pmk-cache-for-reconnect
      • 7.33.127 no pmk-cache-for-reconnect
      • 7.33.128 sae-anti-clogging-threshold
      • 7.33.129 roaming-acct-interim-update
      • 7.33.130 no roaming-acct-interim-update
      • 7.33.131 wifi6
      • 7.33.132 no wifi6
      • 7.33.133 show
    • 7.34 Configure Dynamic PSK Commands
      • 7.34.1 dynamic-psk enable
      • 7.34.2 dynamic-psk external
      • 7.34.3 dynamic-psk passphrase-len
      • 7.34.4 dynamic-psk type
      • 7.34.5 no dynamic-psk
      • 7.34.6 limit-dpsk
      • 7.34.7 no limit-dpsk
      • 7.34.8 shared-dpsk
      • 7.34.9 no shared-dpsk
      • 7.34.10 dynamic-psk-expiration
      • 7.34.11 no l2acl
      • 7.34.12 no role-based-access-ctrl
      • 7.34.13 no l3acl
      • 7.34.14 no l3acl-ipv6
      • 7.34.15 no vlanpool
      • 7.34.16 no dvcpcy
      • 7.34.17 rate-limit
      • 7.34.18 no rate-limit
      • 7.34.19 vlanpool
      • 7.34.20 no mac-addr-format
      • 7.34.21 mac-addr-format
      • 7.34.22 acl dvcpcy
      • 7.34.23 acl prece
      • 7.34.24 acl role-based-access-ctrl
      • 7.34.25 qos classification
      • 7.34.26 no qos classification
      • 7.34.27 qos heuristics-udp
      • 7.34.28 no qos heuristics-udp
      • 7.34.29 qos directed-multicast
      • 7.34.30 no qos directed-multicast
      • 7.34.31 qos igmp-snooping
      • 7.34.32 no qos igmp-snooping
      • 7.34.33 qos mld-snooping
      • 7.34.34 no qos mld-snooping
      • 7.34.35 qos tos-classification
      • 7.34.36 no qos tos-classification
      • 7.34.37 qos priority high
      • 7.34.38 qos priority low
      • 7.34.39 qos directed-threshold
      • 7.34.40 disable-dgaf
      • 7.34.41 no disable-dgaf
      • 7.34.42 proxy-arp
      • 7.34.43 no proxy-arp
      • 7.34.44 80211w-pmf
      • 7.34.45 no 80211w-pmf
      • 7.34.46 ignor-unauth-stats
      • 7.34.47 no ignor-unauth-stats
      • 7.34.48 show
    • 7.35 Configure WLAN Group Commands
      • 7.35.1 wlan-group
      • 7.35.2 no wlan-group
      • 7.35.3 abort
      • 7.35.4 end
      • 7.35.5 exit
      • 7.35.6 quit
      • 7.35.7 name
      • 7.35.8 description
      • 7.35.9 wlan
      • 7.35.10 no wlan
      • 7.35.11 wlan vlan override none
      • 7.35.12 wlan vlan override tag
      • 7.35.13 show
    • 7.36 Configure Role Commands
      • 7.36.1 role
      • 7.36.2 no role
      • 7.36.3 abort
      • 7.36.4 end
      • 7.36.5 exit
      • 7.36.6 quit
      • 7.36.7 name
      • 7.36.8 description
      • 7.36.9 group-attributes
      • 7.36.10 wlan-allowed
      • 7.36.11 specify-wlan-access
      • 7.36.12 no specify-wlan-access
      • 7.36.13 guest-pass-generation
      • 7.36.14 no guest-pass-generation
      • 7.36.15 admin
      • 7.36.16 no admin
      • 7.36.17 access-ctrl
      • 7.36.18 no access-ctrl
      • 7.36.19 dvc-type-allowed
      • 7.36.20 specify-dvc-policy
      • 7.36.21 vlan
      • 7.36.22 rate-limit uplink
      • 7.36.23 rate-limit uplink downlink
      • 7.36.24 no rate-limit
      • 7.36.25 apply-arc-policy
      • 7.36.26 no apply-arc-policy
      • 7.36.27 url-filtering
      • 7.36.28 no url-filtering
      • 7.36.29 show
    • 7.37 Configure VLAN Pool Commands
      • 7.37.1 vlan-pool
      • 7.37.2 no vlan-pool
    • 7.38 Configure User Commands
      • 7.38.1 user
      • 7.38.2 no user
      • 7.38.3 abort
      • 7.38.4 end
      • 7.38.5 exit
      • 7.38.6 quit
      • 7.38.7 user-name
      • 7.38.8 full-name
      • 7.38.9 password
      • 7.38.10 role
      • 7.38.11 show
    • 7.39 Configure Guest Access Commands
      • 7.39.1 guest-access
      • 7.39.2 no guest-access
      • 7.39.3 abort
      • 7.39.4 end
      • 7.39.5 exit
      • 7.39.6 quit
      • 7.39.7 guest-access-force-https-redirection
      • 7.39.8 no guest-access-force-https-redirection
      • 7.39.9 guest-access-guestpass-effective
      • 7.39.10 name
      • 7.39.11 self-service
      • 7.39.12 no self-service
      • 7.39.13 guestpass-duration
      • 7.39.14 guestpass-reauth
      • 7.39.15 no guestpass-reauth
      • 7.39.16 guestpass-share-number
      • 7.39.17 guestpass-sponsor
      • 7.39.18 no guestpass-sponsor
      • 7.39.19 guestpass-sponsor-auth-server
      • 7.39.20 guestpass-sponsor-number
      • 7.39.21 guestpass-notification
      • 7.39.22 guestpass-terms-and-conditions
      • 7.39.23 no guestpass-terms-and-conditions
      • 7.39.24 onboarding
      • 7.39.25 no onboarding
      • 7.39.26 no authentication
      • 7.39.27 authentication guest-pass-and-social-login
      • 7.39.28 authentication only-social-login
      • 7.39.29 no term-of-use
      • 7.39.30 term-of-use
      • 7.39.31 redirect
      • 7.39.32 welcome-text
      • 7.39.33 walled-garden
      • 7.39.34 no walled-garden
      • 7.39.35 social-media-login
        • 7.39.35.1 social-media-login delete-social-media
        • 7.39.35.2 social-media-login google
          • 7.39.35.2.1 social-media-login hds
          • 7.39.35.2.2 social-media-login no hds
        • 7.39.35.3 social-media-login linkedin
        • 7.39.35.4 social-media-login microsoft
        • 7.39.35.5 social-media-login wechat
        • 7.39.35.6 social-media-login wechat force-follow
      • 7.39.36 show
    • 7.40 web-portal-force-https-redirection
    • 7.41 no web-portal-force-https-redirection
    • 7.42 portal-auth-force-dns-server
    • 7.43 no portal_auth-force-dns-server
    • 7.44 guest-access-auth-server
    • 7.45 Configuring Guest Access Restriction Rules
      • 7.45.1 no restrict-access-order
      • 7.45.2 restrict-access-order
      • 7.45.3 show
      • 7.45.4 order
      • 7.45.5 description
      • 7.45.6 type allow
      • 7.45.7 type deny
      • 7.45.8 destination address
      • 7.45.9 destination port
      • 7.45.10 protocol
    • 7.46 IPv6 Guest Restrict Access Commands
      • 7.46.1 no restrict-access-order-ipv6
      • 7.46.2 restrict-access-order-ipv6
      • 7.46.3 show
      • 7.46.4 order
      • 7.46.5 description
      • 7.46.6 type allow
      • 7.46.7 type deny
      • 7.46.8 destination address
      • 7.46.9 destination port
      • 7.46.10 protocol
      • 7.46.11 icmpv6-type
    • 7.47 Configure Hotspot Commands
      • 7.47.1 hotspot
      • 7.47.2 no hotspot
      • 7.47.3 abort
      • 7.47.4 end
      • 7.47.5 exit
      • 7.47.6 quit
      • 7.47.7 show
      • 7.47.8 name
      • 7.47.9 smartclient
      • 7.47.10 no smartclient
      • 7.47.11 login-page
      • 7.47.12 start-page
      • 7.47.13 no session-timeout
      • 7.47.14 session-timeout
      • 7.47.15 no grace-period
      • 7.47.16 grace-period
      • 7.47.17 auth-server local
      • 7.47.18 auth-server name
      • 7.47.19 auth-server name no-mac-bypass
      • 7.47.20 auth-server name mac-bypass
      • 7.47.21 auth-server name mac-bypass mac-addr-format
      • 7.47.22 acct-server
      • 7.47.23 no acct-server
      • 7.47.24 acct-server interim-update
      • 7.47.25 client-isolation
      • 7.47.26 whitelist
      • 7.47.27 location-id
      • 7.47.28 location-name
      • 7.47.29 walled-garden
      • 7.47.30 no walled-garden
    • 7.48 Configuring Hotspot Restricted Access Rules
      • 7.48.1 restrict-access-order
      • 7.48.2 no restrict-access-order
      • 7.48.3 restrict-access-order-ipv6
      • 7.48.4 no restrict-access-order-ipv6
      • 7.48.5 icmpv6-type
    • 7.49 Hotspot Access Restriction Commands
      • 7.49.1 end
      • 7.49.2 exit
      • 7.49.3 show
      • 7.49.4 order
      • 7.49.5 description
      • 7.49.6 type allow
      • 7.49.7 type deny
      • 7.49.8 destination address
      • 7.49.9 destination port
      • 7.49.10 protocol
      • 7.49.11 intrusion-prevention
      • 7.49.12 no intrusion-prevention
    • 7.50 Configure Hotspot 2.0 Commands
      • 7.50.1 hs20op
      • 7.50.2 no hs20op
      • 7.50.3 Configure Hotspot 2.0 Operator Settings
      • 7.50.4 hs20sp
      • 7.50.5 no hs20sp
      • 7.50.6 Configure Hotspot 2.0 Service Provider Settings
      • 7.50.7 nai-realm
      • 7.50.8 name
      • 7.50.9 encoding
      • 7.50.10 eap-method
      • 7.50.11 eap-method eap-mthd
      • 7.50.12 eap-method auth-info
    • 7.51 Configure Mesh Commands
      • 7.51.1 mesh
      • 7.51.2 abort
      • 7.51.3 end
      • 7.51.4 exit
      • 7.51.5 quit
      • 7.51.6 show
      • 7.51.7 ssid
      • 7.51.8 passphrase
      • 7.51.9 hops-warn-threshold
      • 7.51.10 no detect-hops
      • 7.51.11 fan-out-threshold
      • 7.51.12 no detect-fanout
      • 7.51.13 beacon-interval
      • 7.51.14 mgmt-tx-rate
      • 7.51.15 mesh-uplink-selection static
      • 7.51.16 mesh-uplink-selection dynamic
      • 7.51.17 mesh-radio-option
      • 7.51.18 zero-touch-mesh
      • 7.51.19 no zero-touch-mesh
      • 7.51.20 zt-mesh-serial
      • 7.51.21 no zt-mesh-serial
    • 7.52 Configure Alarm Commands
      • 7.52.1 alarm
      • 7.52.2 no alarm
      • 7.52.3 abort
      • 7.52.4 end
      • 7.52.5 exit
      • 7.52.6 quit
      • 7.52.7 e-mail
      • 7.52.8 show
    • 7.53 Configure Alarm-Event Settings
      • 7.53.1 alarm-event
      • 7.53.2 event
      • 7.53.3 no event
    • 7.54 Configure Services Commands
      • 7.54.1 abort
      • 7.54.2 end
      • 7.54.3 exit
      • 7.54.4 quit
      • 7.54.5 auto-channel-background-scanning
        • 7.54.5.1 radio-2.4
        • 7.54.5.2 no radio-2.4
        • 7.54.5.3 radio-5
        • 7.54.5.4 no radio-5
        • 7.54.5.5 off-period
        • 7.54.5.6 no off-period
        • 7.54.5.7 clients
        • 7.54.5.8 interval
        • 7.54.5.9 threshold
        • 7.54.5.10 simulate
        • 7.54.5.11 deploy
        • 7.54.5.12 show
      • 7.54.6 auto-adjust-ap-channel radio-2.4
        • 7.54.6.1 no auto-adjust-ap-power radio-2.4
      • 7.54.7 auto-adjust-ap-power radio-5
        • 7.54.7.1 no auto-adjust-ap-power radio-5
      • 7.54.8 auto-adjust-ap-channel radio-2.4
        • 7.54.8.1 no auto-adjust-ap-channel radio-2.4
      • 7.54.9 auto-adjust-ap-channel radio-5
        • 7.54.9.1 no auto-adjust-ap-channel radio-5
      • 7.54.10 raps
      • 7.54.11 no raps
      • 7.54.12 channelfly
      • 7.54.13 no channelfly
      • 7.54.14 background-scan
      • 7.54.15 background-scan low-threshold
      • 7.54.16 no background-scan
      • 7.54.17 aeroscout-detection
      • 7.54.18 no aeroscout-detection
      • 7.54.19 ekahau
      • 7.54.20 no ekahau
      • 7.54.21 tun-encrypt
      • 7.54.22 no tun-encrypt
      • 7.54.23 tun-block-mcast all
      • 7.54.24 tun-block-mcast non-well-known
      • 7.54.25 no tun-block-mcast
      • 7.54.26 tun-block-bcast
      • 7.54.27 no tun-block-bcast
      • 7.54.28 tun-proxy-arp
      • 7.54.29 no tun-proxy-arp
      • 7.54.30 tun-ip-ageing
      • 7.54.31 pif
      • 7.54.32 no pif
      • 7.54.33 show
    • 7.55 Configure WIPS Commands
      • 7.55.1 wips
    • 7.56 Configure Email Server Commands
      • 7.56.1 email-server
      • 7.56.2 from
      • 7.56.3 enable
      • 7.56.4 no enable
      • 7.56.5 smtp-server-name
      • 7.56.6 smtp-server-port
      • 7.56.7 smtp-auth-name
      • 7.56.8 smtp-auth-password
      • 7.56.9 smtp-wait-time
      • 7.56.10 tls-smtp-encryption
      • 7.56.11 no tls-smtp-encryption
    • 7.57 Configure SMS Server Commands
      • 7.57.1 sms-server
      • 7.57.2 no sms-server
      • 7.57.3 country-code
    • 7.58 Configure mDNS (Bonjour) Commands
      • 7.58.1 mdnsproxy
      • 7.58.2 no mdnsproxy
      • 7.58.3 mdnsproxyrule
      • 7.58.4 no mdnsproxyrule
    • 7.59 Configure Bonjour Policy
      • 7.59.1 bonjour-policy
      • 7.59.2 no bonjour-policy
      • 7.59.3 Configure mDNS Proxy Rules
    • 7.60 Configure Bonjour Fencing Policy
      • 7.60.1 show
      • 7.60.2 description
      • 7.60.3 fencerule
      • 7.60.4 source-type
      • 7.60.5 device-mac
      • 7.60.6 anchor-ap
      • 7.60.7 service
      • 7.60.8 fencing-range
  • 8 Using Debug Commands
    • 8.1 Debug Commands Overview
    • 8.2 General Debug Commands
      • 8.2.1 help
      • 8.2.2 list-all
      • 8.2.3 history
      • 8.2.4 quit
      • 8.2.5 fw_upgrade
      • 8.2.6 restore
      • 8.2.7 restore all
      • 8.2.8 restore failover
      • 8.2.9 restore policy
      • 8.2.10 delete-station
      • 8.2.11 restart-ap
      • 8.2.12 save_debug_info
      • 8.2.13 save-config
      • 8.2.14 emfd-malloc-stats
      • 8.2.15 speedflex
        • 8.2.15.1 no speedflex
    • 8.3 Show Commands
      • 8.3.1 show ap
      • 8.3.2 show station
      • 8.3.3 show logs
      • 8.3.4 show tls
      • 8.3.5 show speedflex
      • 8.3.6 show remote-troubleshooting
      • 8.3.7 ps
      • 8.3.8 show configuration_change_log
    • 8.4 Accessing a Remote AP CLI
      • 8.4.1 remote_ap_cli
    • 8.5 Working with Debug Logs and Log Settings
      • 8.5.1 logs all
      • 8.5.2 no logs all
      • 8.5.3 logs comp sys-mgmt
      • 8.5.4 no logs comp sys-mgmt
      • 8.5.5 logs comp mesh
      • 8.5.6 no logs comp mesh
      • 8.5.7 logs comp web-auth
      • 8.5.8 no logs comp web-auth
      • 8.5.9 logs comp rf-mgmt
      • 8.5.10 no logs comp rf-mgmt
      • 8.5.11 logs comp radius
      • 8.5.12 no logs comp radius
      • 8.5.13 logs comp hotspot-srv
      • 8.5.14 no logs comp hotspot-srv
      • 8.5.15 logs comp aps
      • 8.5.16 no logs comp aps
      • 8.5.17 logs comp net-mgmt
      • 8.5.18 no logs comp net-mgmt
      • 8.5.19 logs comp 802.1x
      • 8.5.20 no logs comp 802.1x
      • 8.5.21 logs comp web-svr
      • 8.5.22 no logs comp web-svr
      • 8.5.23 logs comp 802.11
      • 8.5.24 no logs comp 802.11
      • 8.5.25 logs comp dvlan
      • 8.5.26 no logs comp dvlan
      • 8.5.27 logs comp smart-redundancy
      • 8.5.28 no logs comp smart-redundancy
      • 8.5.29 logs comp bonjour-gateway
      • 8.5.30 no logs comp bonjour-gateway
      • 8.5.31 logs comp mdnsd
      • 8.5.32 no logs comp mdnsd
      • 8.5.33 logs comp client-association
      • 8.5.34 no logs comp client-association
      • 8.5.35 logs mac
      • 8.5.36 no logs mac
      • 8.5.37 logs play
      • 8.5.38 no logs play
      • 8.5.39 logs winbind
      • 8.5.40 support-tls
      • 8.5.41 no support-tls
      • 8.5.42 configuration_change_log
      • 8.5.43 no configuration_change_log
    • 8.6 Remote Troubleshooting
      • 8.6.1 remote-troubleshooting server
      • 8.6.2 remote-troubleshooting start
      • 8.6.3 remote-troubleshooting stop
      • 8.6.4 radius-stats-wlan
      • 8.6.5 radius-stats-authsvr
    • 8.7 AP Core Dump Collection
      • 8.7.1 collect_ap_coredump
      • 8.7.2 no collect_ap_coredump
    • 8.8 Script Execution
      • 8.8.1 script
      • 8.8.2 quit
      • 8.8.3 list
      • 8.8.4 del
      • 8.8.5 info
      • 8.8.6 exec

Understanding the ZoneDirector Command Line Interface

In this section:

  1. Introduction
  2. Accessing the Command Line Interface
    This section describes the requirements and the procedure for accessing the ZoneDirector CLI.
  3. ZoneDirector CLI Setup Wizard
    The CLI setup wizard allows you to quickly configure your controller with basic settings using a short series of CLI commands.
  4. Using the ? Command
  5. Using the Help Command
  6. Top-Level Commands

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback