ipv6

To set the AP’s IPv6 address, use the following command from within the config-ap context:

ipv6 [ enable ] addr IPv6-ADDR IPv6-PREFIX-LENGTH name-server DNS-ADDR mode [ auto | manual |keep ]

Syntax Description

ipv6
Set the AP’s IPv6 addressing
enable
Enable IPv6 addressing
addr
Set the AP’s IPv6 address
IPv6-ADDR
The IPv6 address
IPv6-PREFIX-LENGTH
The IPv6 prefix length. Use a space ( ) to separate the IPv6 address and prefix length
name-server
Set the device’s DNS servers. Use a space ( ) to separate primary and secondary DNS servers
DNS-ADDR [DNS-ADDR]
The IP address of the DNS server
mode
Set the device’s IP addressing mode (auto, manual or “keep AP’s setting”)
auto
Set the device’s IPv6 address mode to auto
manual
Set the device’s IPv6 address mode to manual
keep
Set the device to use its current network settings

Defaults

none

Example

ruckus(config-ap)# ipv6 enable mode auto
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)#